[PATCH 11/15] ARM: dts: stm32: Add boot-led for stm32mp157c-ed1
flat view
STALE280d
LANDED
From: Patrice Chotard <patrice.chotard@foss.st.com>
Date: 2025-11-12 15:48:51
Also in:
linux-devicetree, lkml
Subsystem:
arm/stm32 architecture, the rest · Maintainers:
Maxime Coquelin, Alexandre Torgue, Linus Torvalds
Landed in mainline as 2e54d4466560 on 2026-01-20.
Add options/u-boot/boot-led property to specify to U-Boot the LED which indicates a successful boot. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> --- arch/arm/boot/dts/st/stm32mp157c-ed1.dts | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/st/stm32mp157c-ed1.dts b/arch/arm/boot/dts/st/stm32mp157c-ed1.dts
index 6a1c4e5d31a4..49dd555cc228 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-ed1.dts@@ -74,7 +74,7 @@ retram: retram@38000000 { led { compatible = "gpio-leds"; - led-blue { + led_blue: led-blue { gpios = <&gpiod 9 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; default-state = "off";
@@ -89,6 +89,13 @@ led-red { }; }; + options { + u-boot { + compatible = "u-boot,config"; + boot-led = <&led_blue>; + }; + }; + sd_switch: regulator-sd_switch { compatible = "regulator-gpio"; regulator-name = "sd_switch";
--
2.43.0