Re: [PATCH RESEND v3 2/3] clk: en7523: Add reset-controller support for EN7523 SoC
From: Philipp Zabel <p.zabel@pengutronix.de>
Date: 2025-11-10 07:53:56
Also in:
linux-clk, linux-devicetree, linux-mediatek, lkml
On Mo, 2025-11-10 at 06:56 +0300, Mikhail Kshevetskiy wrote:
Introduce reset API support to EN7523 clock driver. EN7523 uses the same reset logic as EN7581, so just reuse existing code. Signed-off-by: Mikhail Kshevetskiy <redacted> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
quoted hunk ↗ jump to hunk
--- drivers/clk/clk-en7523.c | 64 ++++++++++++++++++++++++++++++++++++---- 1 file changed, 59 insertions(+), 5 deletions(-)diff --git a/drivers/clk/clk-en7523.c b/drivers/clk/clk-en7523.c index 15bbdeb60b8e..08cc8e5acf43 100644 --- a/drivers/clk/clk-en7523.c +++ b/drivers/clk/clk-en7523.c@@ -9,6 +9,7 @@ #include <linux/regmap.h> #include <linux/reset-controller.h> #include <dt-bindings/clock/en7523-clk.h> +#include <dt-bindings/reset/airoha,en7523-reset.h> #include <dt-bindings/reset/airoha,en7581-reset.h> #define RST_NR_PER_BANK 32@@ -299,6 +300,53 @@ static const u16 en7581_rst_ofs[] = { REG_RST_CTRL1, }; +static const u16 en7523_rst_map[] = { + /* RST_CTRL2 */ + [EN7523_XPON_PHY_RST] = 0, + [EN7523_XSI_MAC_RST] = 7, + [EN7523_XSI_PHY_RST] = 8, + [EN7523_NPU_RST] = 9, + [EN7523_I2S_RST] = 10, + [EN7523_TRNG_RST] = 11, + [EN7523_TRNG_MSTART_RST] = 12, + [EN7523_DUAL_HSI0_RST] = 13, + [EN7523_DUAL_HSI1_RST] = 14, + [EN7523_HSI_RST] = 15, + [EN7523_DUAL_HSI0_MAC_RST] = 16, + [EN7523_DUAL_HSI1_MAC_RST] = 17, + [EN7523_HSI_MAC_RST] = 18, + [EN7523_WDMA_RST] = 19, + [EN7523_WOE0_RST] = 20, + [EN7523_WOE1_RST] = 21, + [EN7523_HSDMA_RST] = 22, + [EN7523_I2C2RBUS_RST] = 23, + [EN7523_TDMA_RST] = 24, + /* RST_CTRL1 */ + [EN7523_PCM1_ZSI_ISI_RST] = RST_NR_PER_BANK + 0, + [EN7523_FE_PDMA_RST] = RST_NR_PER_BANK + 1, + [EN7523_FE_QDMA_RST] = RST_NR_PER_BANK + 2, + [EN7523_PCM_SPIWP_RST] = RST_NR_PER_BANK + 4, + [EN7523_CRYPTO_RST] = RST_NR_PER_BANK + 6, + [EN7523_TIMER_RST] = RST_NR_PER_BANK + 8, + [EN7523_PCM1_RST] = RST_NR_PER_BANK + 11, + [EN7523_UART_RST] = RST_NR_PER_BANK + 12, + [EN7523_GPIO_RST] = RST_NR_PER_BANK + 13, + [EN7523_GDMA_RST] = RST_NR_PER_BANK + 14, + [EN7523_I2C_MASTER_RST] = RST_NR_PER_BANK + 16, + [EN7523_PCM2_ZSI_ISI_RST] = RST_NR_PER_BANK + 17, + [EN7523_SFC_RST] = RST_NR_PER_BANK + 18, + [EN7523_UART2_RST] = RST_NR_PER_BANK + 19, + [EN7523_GDMP_RST] = RST_NR_PER_BANK + 20, + [EN7523_FE_RST] = RST_NR_PER_BANK + 21, + [EN7523_USB_HOST_P0_RST] = RST_NR_PER_BANK + 22, + [EN7523_GSW_RST] = RST_NR_PER_BANK + 23, + [EN7523_SFC2_PCM_RST] = RST_NR_PER_BANK + 25, + [EN7523_PCIE0_RST] = RST_NR_PER_BANK + 26, + [EN7523_PCIE1_RST] = RST_NR_PER_BANK + 27, + [EN7523_PCIE_HB_RST] = RST_NR_PER_BANK + 29, + [EN7523_XPON_MAC_RST] = RST_NR_PER_BANK + 31, +}; + static const u16 en7581_rst_map[] = { /* RST_CTRL2 */ [EN7581_XPON_PHY_RST] = 0,@@ -357,6 +405,9 @@ static const u16 en7581_rst_map[] = { [EN7581_XPON_MAC_RST] = RST_NR_PER_BANK + 31, }; +static int en7581_reset_register(struct device *dev, void __iomem *base, + const u16 *rst_map, int nr_resets); + static u32 en7523_get_base_rate(const struct en_clk_desc *desc, u32 val) { if (!desc->base_bits)@@ -552,7 +603,8 @@ static int en7523_clk_hw_init(struct platform_device *pdev, en7523_register_clocks(&pdev->dev, clk_data, base, np_base); - return 0; + return en7581_reset_register(&pdev->dev, np_base, en7523_rst_map, + ARRAY_SIZE(en7523_rst_map));
I wonder if this wouldn't be better moved out of hw_init(), with rst_map and the corresponding ARRAY_SIZE() stored in struct en_clk_soc_data. Registering a reset controller is not hardware initialization, after all. But that's not an issue with this patch. regards Philipp