QCS8300 is a Qualcomm SoC. This series adds bindings and devicetree
and driver changes to bring up CSIPHY, TPG, CSID, VFE/RDI interfaces
in QCS8300.

QCS8300 provides
- 2 x VFE, 3 RDI per VFE
- 5 x VFE Lite, 6 RDI per VFE
- 2 x CSID
- 5 x CSID Lite
- 3 x TPG
- 3 x CSIPHY

Changes in v5:
- Added Fixes: tag - Bryan
- Removed empty lines between single properties - Vladimir
- Modified binding phy supply description - Vladimir
- Link to v4:
  https://lore.kernel.org/all/8966ddaf-9c10-4626-a4cc-36efd3fc93e2@kernel.org (local)

Changes in v4 compared to v3:
- Added supplies in bindings to enable camera sensor.
  This change was earlier added as V3.1 of Binidings which was 
  reviewed by Krzysztof and Bryan. Link to this discussion:
  https://lore.kernel.org/all/20250910104915.1444669-1-quic_vikramsa@quicinc.com/ (local)
- Droped the zero-prefix from the size field un DT patch - Konrad
- Link to v3:
  https://lore.kernel.org/all/20250813053724.232494-1-quic_vikramsa@quicinc.com/ (local)

Changes in v3 compared to v2:
- Bindings and Device Tree: Reordered csid_wrapper to appear first in the
  register list (as suggested by Bryan).
- CSIPHY Driver: Updated the commit message for the CSIPHY patch.
- VFE/CSID Resource Data: Reused the same resource data as sa8775p for VFE
  and CSID.
- Patch Series Order: Rearranged the patch sequence and moved the DTSI
  update to the final patch in the series.
- Code Cleanup: Removed duplicate data structures and reused existing
  ones.
- Optimization: Simplified and optimized conditional checks.
- Link to v2:
  https://lore.kernel.org/linux-arm-msm/20250711131134.215382-1-quic_vikramsa@quicinc.com/ (local)

Changes compared to v1:
- Changed the order for register entries in bindings - Krzysztof
- Changed the naming for interrupts for consistency - Krzysztof
- Combined separate series for driver and dtsi into one.
- Rebased on top of latest version of sa8775p camss patches.
- Link to v1:
  Driver: https://lore.kernel.org/all/20250214095611.2498950-1-quic_vikramsa@quicinc.com (local)
  DTSI: https://lore.kernel.org/all/20250214094747.2483058-1-quic_vikramsa@quicinc.com (local)  

We have tested this on qcs8300-ride board with 'Test Pattern Generator'
https://lore.kernel.org/all/20250925-camss_tpg-v4-0-d2eb099902c8@oss.qualcomm.com/ (local)

Used following tools for the sanity check of these changes.
- make CHECK_DTBS=y W=1 DT_SCHEMA_FILES=media/qcom,qcs8300-camss.yaml
  qcom/qcs8300-ride.dtb
- make DT_CHECKER_FLAGS=-m W=1 DT_SCHEMA_FILES=media/qcom,qcs8300-camss.yaml
  dt_binding_check
- make -j32 W=1
- checkpatch.pl

Vikram Sharma (2):
  dt-bindings: media: qcom,qcs8300-camss: Add missing power supplies
  arm64: dts: qcom: qcs8300: Add support for camss

 .../bindings/media/qcom,qcs8300-camss.yaml    |  13 ++
 arch/arm64/boot/dts/qcom/qcs8300.dtsi         | 170 ++++++++++++++++++
 2 files changed, 183 insertions(+)

-- 
2.34.1