[PATCH v4 8/8] arm64: dts: imx8ulp: add sim lpav node
From: Laurentiu Mihalcea <hidden>
Date: 2025-11-04 12:04:15
Also in:
imx, linux-clk, linux-devicetree, lkml
Subsystem:
arm/freescale imx / mxc arm architecture, the rest · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
From: Laurentiu Mihalcea <redacted> Add DT node for the SIM LPAV module. Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Laurentiu Mihalcea <redacted> --- arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
index 13b01f3aa2a4..9b5d98766512 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi@@ -776,6 +776,23 @@ edma2: dma-controller@2d800000 { "ch28", "ch29", "ch30", "ch31"; }; + sim_lpav: clock-controller@2da50000 { + compatible = "fsl,imx8ulp-sim-lpav"; + reg = <0x2da50000 0x10000>; + clocks = <&cgc2 IMX8ULP_CLK_LPAV_BUS_DIV>, + <&cgc2 IMX8ULP_CLK_HIFI_DIVCORE>, + <&cgc2 IMX8ULP_CLK_HIFI_DIVPLAT>; + clock-names = "bus", "core", "plat"; + #clock-cells = <1>; + #reset-cells = <1>; + + sim_lpav_mux: mux-controller { + compatible = "reg-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x8 0x00000200>; + }; + }; + cgc2: clock-controller@2da60000 { compatible = "fsl,imx8ulp-cgc2"; reg = <0x2da60000 0x10000>;
--
2.43.0