Re: [PATCH v2 15/15] arm64: dts: allwinner: h616: add NAND controller
From: Jernej Škrabec <jernej.skrabec@gmail.com>
Date: 2025-10-13 15:43:44
Also in:
linux-devicetree, linux-sunxi, lkml
Dne ponedeljek, 13. oktober 2025 ob 17:26:45 Srednjeevropski poletni čas je Richard Genoud napisal(a):
quoted hunk ↗ jump to hunk
The H616 has a NAND controller quite similar to the A10/A23 ones, but with some register differences, more clocks (for ECC and MBUS), more ECC strengths, so this requires a new compatible string. Add the NAND controller node and pins in the device tree. Signed-off-by: Richard Genoud <richard.genoud@bootlin.com> --- .../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 51 +++++++++++++++++++ 1 file changed, 51 insertions(+)diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi index ceedae9e399b..bb53c6c63836 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi@@ -304,6 +304,42 @@ mmc2_pins: mmc2-pins { bias-pull-up; }; + /omit-if-no-ref/ + nand_pins: nand-pins { + pins = "PC0", "PC1", "PC2", "PC5", "PC8", "PC9", + "PC10", "PC11", "PC12", "PC13", "PC14", + "PC15", "PC16"; + function = "nand0"; + }; + + /omit-if-no-ref/ + nand_cs0_pin: nand-cs0-pin { + pins = "PC4"; + function = "nand0"; + bias-pull-up; + }; + + /omit-if-no-ref/ + nand_cs1_pin: nand-cs1-pin { + pins = "PC3"; + function = "nand0"; + bias-pull-up; + }; + + /omit-if-no-ref/ + nand_rb0_pin: nand-rb0-pin { + pins = "PC6"; + function = "nand0"; + bias-pull-up; + }; + + /omit-if-no-ref/ + nand_rb1_pin: nand-rb1-pin { + pins = "PC7"; + function = "nand0"; + bias-pull-up; + }; + /omit-if-no-ref/ spi0_pins: spi0-pins { pins = "PC0", "PC2", "PC4";@@ -377,6 +413,21 @@ iommu: iommu@30f0000 { #iommu-cells = <1>; }; + nfc: nand-controller@4011000 { + compatible = "allwinner,sun50i-h616-nand-controller"; + reg = <0x04011000 0x1000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND0>, + <&ccu CLK_NAND1>, <&ccu CLK_MBUS_NAND>; + clock-names = "ahb", "mod", "ecc", "mbus"; + resets = <&ccu RST_BUS_NAND>; + reset-names = "ahb"; + dmas = <&dma 10>; + dma-names = "rxtx"; + #address-cells = <1>; + #size-cells = <0>; + };
Sorry, forgot to mention. This should be marked as disabled, as most of the boards don't have NAND connected. Best regards, Jernej
+
mmc0: mmc@4020000 {
compatible = "allwinner,sun50i-h616-mmc",
"allwinner,sun50i-a100-mmc";