On Wed, Sep 24, 2025 at 04:59:11PM -0400, Frank Li wrote:

On Wed, Sep 24, 2025 at 02:44:57PM -0500, Bjorn Helgaas wrote:

quoted

On Wed, Sep 24, 2025 at 03:23:21PM +0800, Richard Zhu wrote:

quoted

The ASPM configuration shouldn't leak out here. Remove the L1SS check
during L2 entry.

I'm all in favor of removing this code if possible, but we need to
explain why this is safe.  The L1SS check was added for some reason,
and we need to explain why that reason doesn't apply.

That's original discussion
https://lore.kernel.org/linux-pci/20230720160738.GC48270@thinkpad/ (local)

"To be precise, NVMe driver will shutdown the device if there is no
ASPM support and keep it in low power mode otherwise (there are
other cases as well but we do not need to worry).

But here you are not checking for ASPM state in the suspend path,
and just forcing the link to be in L2/L3 (thereby D3Cold) even
though NVMe driver may expect it to be in low power state like
ASPM/APST.

So you should only put the link to L2/L3 if there is no ASPM
support. Otherwise, you'll ending up with bug reports when users
connect NVMe to it.

- Mani"

Whatever the reasoning is, it needs to be in the commit log.  The
above might be leading to the reasoning, but it would need a lot more
dots to be connected to be persuasive.

If NVMe is making assumptions about the ASPM configuration, there
needs to be some generic way to keep track of that.  E.g., if NVMe
doesn't work correctly with some ASPM states, maybe it shouldn't
advertise support for those states.  Hacking up every host controller
driver doesn't seem like a viable approach.

quoted

quoted

Cc: stable@vger.kernel.org
Fixes: 4774faf854f5 ("PCI: dwc: Implement generic suspend/resume functionality")
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
 drivers/pci/controller/dwc/pcie-designware-host.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index 952f8594b501..9d46d1f0334b 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c

@@ -1005,17 +1005,9 @@ static int dw_pcie_pme_turn_off(struct dw_pcie *pci)

 int dw_pcie_suspend_noirq(struct dw_pcie *pci)
 {
-	u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
 	u32 val;
 	int ret;

-	/*
-	 * If L1SS is supported, then do not put the link into L2 as some
-	 * devices such as NVMe expect low resume latency.
-	 */
-	if (dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKCTL) & PCI_EXP_LNKCTL_ASPM_L1)
-		return 0;
-
 	if (pci->pp.ops->pme_turn_off) {
 		pci->pp.ops->pme_turn_off(&pci->pp);
 	} else {
--

2.37.1