[PATCH v5 5/6] ARM: dts: imx6ull-engicam-microgea-bmm: set touchscreen glitch threshold
flat view
STALE391d
SUPERSEDED: 13 (13M)
From: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Date: 2025-09-18 15:52:51
Also in:
imx, linux-devicetree, lkml
Subsystem:
arm/freescale imx / mxc / layerscape arm architecture, the rest · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
Revision v5 of 5 in this series; 1 review trailer (1 from subsystem maintainers).
Revisions (5)
This way the detected signal is valid only if it lasts longer than 62 µs, otherwise it is not sampled. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> --- Changes in v5: - Add Reviewed-by tag of Frank Li arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-bmm.dts | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-bmm.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-bmm.dts
index 279d46c22cd7..f12084d8f2a0 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-bmm.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-bmm.dts@@ -154,6 +154,7 @@ &tsc { pinctrl-0 = <&pinctrl_tsc>; measure-delay-time = <0x9ffff>; pre-charge-time = <0xfff>; + touchscreen-glitch-threshold-ns = <62000>; xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; status = "okay"; };
--
2.43.0