Re: [PATCH] clk: sunxi-ng: sun6i-rtc: Add A523 specifics
From: Jernej Škrabec <jernej.skrabec@gmail.com>
Date: 2025-09-09 17:41:09
Also in:
linux-clk, linux-sunxi, lkml
Dne torek, 9. september 2025 ob 19:09:47 Srednjeevropski poletni čas je Chen-Yu Tsai napisal(a):
From: Chen-Yu Tsai <redacted> The A523's RTC block is backward compatible with the R329's, but it also has a calibration function for its internal oscillator, which would allow it to provide a clock rate closer to the desired 32.768 KHz. This is useful on the Radxa Cubie A5E, which does not have an external 32.768 KHz crystal. Add new compatible-specific data for it. Signed-off-by: Chen-Yu Tsai <redacted>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Best regards, Jernej
quoted hunk ↗ jump to hunk
--- drivers/clk/sunxi-ng/ccu-sun6i-rtc.c | 11 +++++++++++ 1 file changed, 11 insertions(+)diff --git a/drivers/clk/sunxi-ng/ccu-sun6i-rtc.c b/drivers/clk/sunxi-ng/ccu-sun6i-rtc.c index 0536e880b80f..f6bfeba009e8 100644 --- a/drivers/clk/sunxi-ng/ccu-sun6i-rtc.c +++ b/drivers/clk/sunxi-ng/ccu-sun6i-rtc.c@@ -325,6 +325,13 @@ static const struct sun6i_rtc_match_data sun50i_r329_rtc_ccu_data = { .osc32k_fanout_nparents = ARRAY_SIZE(sun50i_r329_osc32k_fanout_parents), }; +static const struct sun6i_rtc_match_data sun55i_a523_rtc_ccu_data = { + .have_ext_osc32k = true, + .have_iosc_calibration = true, + .osc32k_fanout_parents = sun50i_r329_osc32k_fanout_parents, + .osc32k_fanout_nparents = ARRAY_SIZE(sun50i_r329_osc32k_fanout_parents), +}; + static const struct of_device_id sun6i_rtc_ccu_match[] = { { .compatible = "allwinner,sun50i-h616-rtc",@@ -334,6 +341,10 @@ static const struct of_device_id sun6i_rtc_ccu_match[] = { .compatible = "allwinner,sun50i-r329-rtc", .data = &sun50i_r329_rtc_ccu_data, }, + { + .compatible = "allwinner,sun55i-a523-rtc", + .data = &sun55i_a523_rtc_ccu_data, + }, {}, }; MODULE_DEVICE_TABLE(of, sun6i_rtc_ccu_match);