On Thu, 17 Jul 2025 17:27:03 +0200, A. Sverdlin wrote:

There is an issue possible where TI AM33xx SoCs do not boot properly after
a reset if EMU0/EMU1 pins were used as GPIO and have been driving low level
actively prior to reset [1].

"Advisory 1.0.36 EMU0 and EMU1: Terminals Must be Pulled High Before
ICEPick Samples

[...]

Applied, thanks!

[1/1] ARM: AM33xx: Implement TI advisory 1.0.36 (EMU0/EMU1 pins state on reset)
      commit: 8a6506e1ba0d2b831729808d958aae77604f12f9

Best regards,
-- 
Kevin Hilman [off-list ref]