[PATCH v5 6/9] phy: phy-can-transceiver: Add support for TJA105{1,7}
From: Peng Fan <peng.fan@nxp.com>
Date: 2025-09-04 08:37:44
Also in:
imx, linux-can, linux-devicetree, linux-phy, lkml
Subsystem:
can network drivers, generic phy framework, the rest · Maintainers:
Marc Kleine-Budde, Vincent Mailhol, Vinod Koul, Linus Torvalds
Support TJA105{1,7} which are a single channel high-speed CAN transceiver
with silent mode supported.
phy mode is not implemented as of now. silent settings are kept in
phy_power_on and phy_power_off. After phy mode is supported, the silent
settings could be moved to phy_set_mode.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
drivers/phy/phy-can-transceiver.c | 35 +++++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/drivers/phy/phy-can-transceiver.c b/drivers/phy/phy-can-transceiver.c
index ccb29e1dfe0d07005b4bcd8fefa2787292d921a0..d9fd3564970695d5460ffdc4e8636dd7638d64a2 100644
--- a/drivers/phy/phy-can-transceiver.c
+++ b/drivers/phy/phy-can-transceiver.c@@ -18,10 +18,12 @@ struct can_transceiver_data { #define CAN_TRANSCEIVER_STB_PRESENT BIT(0) #define CAN_TRANSCEIVER_EN_PRESENT BIT(1) #define CAN_TRANSCEIVER_DUAL_CH BIT(2) +#define CAN_TRANSCEIVER_SILENT_PRESENT BIT(3) }; struct can_transceiver_phy { struct phy *generic_phy; + struct gpio_desc *silent_gpio; struct gpio_desc *standby_gpio; struct gpio_desc *enable_gpio; struct can_transceiver_priv *priv;
@@ -47,6 +49,10 @@ static int can_transceiver_phy_power_on(struct phy *phy) } } + ret = gpiod_set_value_cansleep(can_transceiver_phy->silent_gpio, 0); + if (ret) + return ret; + ret = gpiod_set_value_cansleep(can_transceiver_phy->standby_gpio, 0); if (ret) return ret;
@@ -60,6 +66,10 @@ static int can_transceiver_phy_power_off(struct phy *phy) struct can_transceiver_phy *can_transceiver_phy = phy_get_drvdata(phy); int ret; + ret = gpiod_set_value_cansleep(can_transceiver_phy->silent_gpio, 1); + if (ret) + return ret; + ret = gpiod_set_value_cansleep(can_transceiver_phy->standby_gpio, 1); if (ret) return ret;
@@ -92,6 +102,14 @@ static const struct can_transceiver_data tja1048_drvdata = { .flags = CAN_TRANSCEIVER_STB_PRESENT | CAN_TRANSCEIVER_DUAL_CH, }; +static const struct can_transceiver_data tja1051_drvdata = { + .flags = CAN_TRANSCEIVER_SILENT_PRESENT | CAN_TRANSCEIVER_EN_PRESENT, +}; + +static const struct can_transceiver_data tja1057_drvdata = { + .flags = CAN_TRANSCEIVER_SILENT_PRESENT, +}; + static const struct of_device_id can_transceiver_phy_ids[] = { { .compatible = "ti,tcan1042",
@@ -105,6 +123,14 @@ static const struct of_device_id can_transceiver_phy_ids[] = { .compatible = "nxp,tja1048", .data = &tja1048_drvdata }, + { + .compatible = "nxp,tja1051", + .data = &tja1051_drvdata + }, + { + .compatible = "nxp,tja1057", + .data = &tja1057_drvdata + }, { .compatible = "nxp,tjr1443", .data = &tcan1043_drvdata
@@ -150,6 +176,7 @@ static int can_transceiver_phy_probe(struct platform_device *pdev) const struct can_transceiver_data *drvdata; const struct of_device_id *match; struct phy *phy; + struct gpio_desc *silent_gpio; struct gpio_desc *standby_gpio; struct gpio_desc *enable_gpio; struct mux_state *mux_state;
@@ -213,6 +240,14 @@ static int can_transceiver_phy_probe(struct platform_device *pdev) priv->can_transceiver_phy[i].enable_gpio = enable_gpio; } + if (drvdata->flags & CAN_TRANSCEIVER_SILENT_PRESENT) { + silent_gpio = devm_gpiod_get_index_optional(dev, "silent", i, + GPIOD_OUT_LOW); + if (IS_ERR(silent_gpio)) + return PTR_ERR(silent_gpio); + priv->can_transceiver_phy[i].silent_gpio = silent_gpio; + } + phy_set_drvdata(priv->can_transceiver_phy[i].generic_phy, &priv->can_transceiver_phy[i]); }
--
2.37.1