[PATCH v2 3/3] arm64: dts: samsung,coreprimevelte: add SDIO
From: Karel Balej <balejk@matfyz.cz>
Date: 2025-08-28 09:51:43
Also in:
linux-devicetree, linux-mmc, lkml, phone-devel
Subsystem:
arm/marvell kirkwood and armada 370, 375, 38x, 39x, xp, 3700, 7k/8k, cn9130 soc support, arm/marvell pxa1908 soc support, the rest · Maintainers:
Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Duje Mihanović, Linus Torvalds
Set some basic properties of the SDIO card of the samsung,coreprimevelte smartphone. The SDIO is used as an interface for WiFi, Bluetooth and FM radio serviced by the Marvell 88W8777 (SD8777) chipset. Support for this chipset is currently not in-tree because the firmware is not available in linux-firmware, however it is possible to trivially run it out-of-tree using the mwifiex and Marvell Bluetooth drivers with some caveats. Link: https://lore.kernel.org/r/20231029111807.19261-1-balejk@matfyz.cz/ (local) Signed-off-by: Karel Balej <balejk@matfyz.cz> --- Notes: v2: - Drop the sdh2 pinctrl configuration which was originally included by accident. - Drop broken-cd on the node as it's ignored with non-removable (thank you to Duje for pointing this out). .../mmp/pxa1908-samsung-coreprimevelte.dts | 72 +++++++++++++++++++ 1 file changed, 72 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts b/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts
index 0ac1a24dc410..81806f655c88 100644
--- a/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts
+++ b/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts@@ -10,6 +10,7 @@ / { aliases { mmc0 = &sdh2; /* eMMC */ mmc1 = &sdh0; /* SD card */ + mmc2 = &sdh1; /* SDIO */ serial0 = &uart0; };
@@ -286,6 +287,69 @@ sdh0_pins_2: sdh0-pins-2 { pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; pinctrl-single,low-power-mode = <0x208 0x388>; }; + + sdh1_pins_0: sdh1-pins-0 { + pinctrl-single,pins = < + 0x170 1 + 0x174 1 + 0x178 1 + 0x17c 1 + 0x180 1>; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; + + sdh1_pins_1: sdh1-pins-1 { + pinctrl-single,pins = <0x184 1>; + pinctrl-single,drive-strength = <0 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0x208 0x388>; + }; + + sdh1_pins_2: sdh1-pins-2 { + pinctrl-single,pins = <0xec 0>; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0x8000 0x8000 0 0xc000>; + pinctrl-single,bias-pulldown = <0x8000 0x8000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; + + sdh1_fast_pins_0: sdh1-fast-pins-0 { + pinctrl-single,pins = < + 0x170 1 + 0x174 1 + 0x178 1 + 0x17c 1 + 0x180 1 + >; + pinctrl-single,drive-strength = <0x1800 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; + + sdh1_fast_pins_1: sdh1-fast-pins-1 { + pinctrl-single,pins = < + 0x184 1 + >; + pinctrl-single,drive-strength = <0x1800 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0x208 0x388>; + }; }; &uart0 {
@@ -367,3 +431,11 @@ &sdh0 { vmmc-supply = <&ldo14>; vqmmc-supply = <&ldo6>; }; + +&sdh1 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&sdh1_pins_0 &sdh1_pins_1 &sdh1_pins_2>; + pinctrl-1 = <&sdh1_fast_pins_0 &sdh1_fast_pins_1 &sdh1_pins_2>; + bus-width = <4>; + non-removable; +};
--
2.51.0