On 15:15-20250822, Michael Walle wrote:

Now that the PMIC support is there, we can finally, upstream the
support for this board. Besides the usual device tree, this
patchset contains the support for the on-board house keeping MCU. It
make extensive reuse of the drivers for the former SMARC-sAL28
board. Besides different hwmon sensors, all the dt binding patches
will just add a board specific compatible (in addition to the old
sl28 compatible) to make any future board specific quirks possible.

I'm aware that there is a patch [1] which moves the sl28cpld MFD
schema to a different directory. Once that patch is merged, I'll
repost this series. But I already want to get some early feedback.

[1] https://lore.kernel.org/r/20250822075712.27314-2-krzysztof.kozlowski@linaro.org/ (local)

Michael Walle (7):
  dt-bindings: arm: ti: Add bindings for Kontron SMARC-sAM67 module
  dt-bindings: mfd: sl28cpld: add sa67mcu compatible
  dt-bindings: hwmon: sl28cpld: add sa67mcu compatible
  dt-bindings: watchdog: add SMARC-sAM67 support
  dt-bindings: nvmem: sl28cpld: add sa67mcu compatible
  hwmon: sl28cpld: add SMARC-sAM67 support
  arm64: dts: ti: Add support for Kontron SMARC-sAM67

Since this goes through multiple maintainers, may I suggest the
following strategy?

for this window:
* send dts and board binding changes dropping the nodes that are yet to
 be upstream
* send the compatible changes to each of the maintainers

Next window:
* add the nodes based on acceptance of the driver bindings

This removes multiple maintainers needing to give me immutable tags etc.

What do you think?

 .../devicetree/bindings/arm/ti/k3.yaml        |    1 +
 .../hwmon/kontron,sl28cpld-hwmon.yaml         |    1 +
 .../bindings/mfd/kontron,sl28cpld.yaml        |    7 +-
 .../nvmem/layouts/kontron,sl28-vpd.yaml       |    7 +-
 .../watchdog/kontron,sl28cpld-wdt.yaml        |    7 +-
 arch/arm64/boot/dts/ti/Makefile               |    6 +
 .../dts/ti/k3-am67a-kontron-sa67-base.dts     | 1092 +++++++++++++++++
 .../dts/ti/k3-am67a-kontron-sa67-gbe1.dtso    |   19 +
 .../ti/k3-am67a-kontron-sa67-rtc-rv8263.dtso  |   24 +
 drivers/hwmon/sl28cpld-hwmon.c                |   76 +-
 10 files changed, 1234 insertions(+), 6 deletions(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-base.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-gbe1.dtso
 create mode 100644 arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-rtc-rv8263.dtso

-- 
2.39.5

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D
https://ti.com/opensource