[PATCH 2/2] arm64: dts: freescale: imx8mp-moduline-display-106: Use phys to replace xceiver-supply
From: Maud Spierings via B4 Relay <devnull+maudspierings.gocontroll.com@kernel.org>
Date: 2025-08-22 09:20:09
Also in:
b4-sent, imx, linux-can, linux-devicetree, linux-phy, lkml
Subsystem:
arm/freescale imx / mxc arm architecture, the rest · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
From: Maud Spierings <maudspierings@gocontroll.com> Fix the can tranceivers to actually use the new phy description instead of the regulator tweak. Signed-off-by: Maud Spierings <maudspierings@gocontroll.com> --- .../imx8mp-tx8p-ml81-moduline-display-106.dts | 46 +++++++++++----------- 1 file changed, 22 insertions(+), 24 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts
index afd886dd590ff6f125d1d0e91aa71ae0063b5fd1..88ad422c27603b77c1099f2efe61953999c35f77 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts@@ -36,6 +36,24 @@ external-sensor-supply { vout-supply = <®_5v0_sensor>; }; + flexcan1_phy: can-phy0 { + compatible = "ti,tcan1051", "ti,tcan1042"; + #phy-cells = <0>; + pinctrl-0 = <&pinctrl_flexcan1_stby>; + pinctrl-names = "default"; + max-bitrate = <5000000>; + standby-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; + }; + + flexcan2_phy: can-phy1 { + compatible = "ti,tcan1051", "ti,tcan1042"; + #phy-cells = <0>; + pinctrl-0 = <&pinctrl_flexcan2_stby>; + pinctrl-names = "default"; + max-bitrate = <5000000>; + standby-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; + }; + reg_1v8_per: regulator-1v8-per { compatible = "regulator-fixed"; pinctrl-0 = <&pinctrl_reg_1v8>;
@@ -85,26 +103,6 @@ reg_6v4: regulator-6v4 { regulator-name = "6v4"; }; - reg_can1_stby: regulator-can1-stby { - compatible = "regulator-fixed"; - pinctrl-0 = <&pinctrl_flexcan1_reg>; - pinctrl-names = "default"; - regulator-max-microvolt = <3300000>; - regulator-min-microvolt = <3300000>; - regulator-name = "can1-stby"; - gpio = <&gpio4 3 GPIO_ACTIVE_LOW>; - }; - - reg_can2_stby: regulator-can2-stby { - compatible = "regulator-fixed"; - pinctrl-0 = <&pinctrl_flexcan2_reg>; - pinctrl-names = "default"; - regulator-max-microvolt = <3300000>; - regulator-min-microvolt = <3300000>; - regulator-name = "can2-stby"; - gpio = <&gpio5 9 GPIO_ACTIVE_LOW>; - }; - sound { compatible = "simple-audio-card"; simple-audio-card,bitclock-master = <&cpudai>;
@@ -180,16 +178,16 @@ adc@2 { }; &flexcan1 { + phys = <&flexcan1_phy>; pinctrl-0 = <&pinctrl_flexcan1>; pinctrl-names = "default"; - xceiver-supply = <®_can1_stby>; status = "okay"; }; &flexcan2 { + phys = <&flexcan2_phy>; pinctrl-0 = <&pinctrl_flexcan2>; pinctrl-names = "default"; - xceiver-supply = <®_can2_stby>; status = "okay"; };
@@ -278,7 +276,7 @@ MX8MP_IOMUXC_SPDIF_TX__CAN1_TX >; }; - pinctrl_flexcan1_reg: flexcan1reggrp { + pinctrl_flexcan1_stby: flexcan1stbygrp { fsl,pins = < MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
@@ -294,7 +292,7 @@ MX8MP_IOMUXC_UART3_RXD__CAN2_TX >; }; - pinctrl_flexcan2_reg: flexcan2reggrp { + pinctrl_flexcan2_stby: flexcan2stbygrp { fsl,pins = < MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
--
2.50.1