Patch 1 adds the binding for the NVIDIA GB200-UT3.0b platform.
Patch 2 adds the device tree for the NVIDIA GB200-UT3.0b platform.

This is an Aspeed AST2600 based unit testing platform for GB200.
UT3.0b is different than nvidia-gb200nvl-bmc due to networking topology
differences, additional gpio expanders, and voltage regulator gating
some devices.

Reference to Ast2600 SOC [1].
Reference to Blackwell GB200NVL Platform [2].

Link: https://www.aspeedtech.com/server_ast2600/ [1]
Link: https://nvdam.widen.net/s/wwnsxrhm2w/blackwell-datasheet-3384703 [2]
Signed-off-by: Donald Shannon <redacted>
---
Changes v1 -> v2:
  - Changed phy-mode to rgmii-id [Lunn]
  - Removed redundant max-speed for mac0 [Lunn]
  - Fixed typo from gb200nvl to gb200 in Makefile
Changes v2 -> v3:
 - Fixed whitespace issues [Krzysztof]
 - Fixed schema validation issues from my end ( there are still issues
 with the aspeed dtsi file that are not related to this new dts)
 [Herring]
 - Reordered to follow style guide [Krzysztof]
 - Removed redundant status okays
 - Changed vcc to vdd for the power gating on the gpio expanders
Changes v3 -> v4:
  - Added changelog [Krzysztof]
  - Added nvidia,gb200-ut30b board binding [Krzysztof]
  - Removed unused imports
  - Reordered a couple other style guide violations
  - Added back in a couple needed "status okay"s
Changes v4 -> v5:
 - Resumed my patch after a pause
 - Don't plan to make this include of nvidia-gb200nvl-bmc due to some
 platform differences
 - Fixed io expanders that weren't gated by the 3.3V standby regulator
 - Fixed incorrect interrupt pin for one IO expander
 - Removed some IO expanders and I2C busses
Changes v5 -> v6:
 - Fixed subject line
 - Added missing gpio-key compatible type to buttons
 - Added Acked-by for Krzysztof
Changes v6 -> v7:
  - Removed Acked-by Krzysztof
Changes v7 -> v8:
  - Added missing linux,code for identify and uid button
  - Added Acked-by for Krzysztof
---

Donald Shannon (2):
  dt-bindings: arm: aspeed: Add NVIDIA GB200-UT3.0b  board
  ARM: dts: aspeed: Add NVIDIA GB200 UT3.0b board

 .../bindings/arm/aspeed/aspeed.yaml           |    1 +
 arch/arm/boot/dts/aspeed/Makefile             |    1 +
 .../aspeed/aspeed-bmc-nvidia-gb200-ut30b.dts  | 1030 +++++++++++++++++
 3 files changed, 1032 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dts


base-commit: 05adbee3ad528100ab0285c15c91100e19e10138
-- 
2.43.0