On 8/6/25 10:23, Krzysztof Kozlowski wrote:

On 06/08/2025 10:09, Patrice Chotard wrote:

quoted

Add memory-region-names property for stm32mp257f-ev1.
This allows to identify and check memory-map area's configuration.

No, first entry is already identified.

ok

quoted

Cc: stable@vger.kernel.org
Fixes: cad2492de91c ("arm64: dts: st: Add SPI NOR flash support on stm32mp257f-ev1 board")

No blank lines.

ok

quoted

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
---
 arch/arm64/boot/dts/st/stm32mp257f-ev1.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
index 2f561ad4066544445e93db78557bc4be1c27095a..16309029758cf24834f406f5203046ded371a8f9 100644
--- a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
+++ b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts

@@ -197,6 +197,7 @@ &i2c8 {
 
 &ommanager {
 	memory-region = <&mm_ospi1>;
+	memory-region-names = "mm_ospi1";

It does not look like you tested the DTS against bindings. Please run
`make dtbs_check W=1` (see

My bad, i am preparing the v2.

Thanks

Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).
Maybe you need to update your dtschema and yamllint. Don't rely on
distro packages for dtschema and be sure you are using the latest
released dtschema.

Best regards,
Krzysztof