Re: [PATCH v2 2/3] usb: chipidea: ci_hdrc_imx: Set out of band wakeup for i.MX95
From: Xu Yang <xu.yang_2@nxp.com>
Date: 2025-08-06 09:33:36
Also in:
arm-scmi, imx, linux-pm, linux-usb, lkml
Subsystem:
chipidea usb high speed dual role controller, the rest, usb subsystem · Maintainers:
Peter Chen, Linus Torvalds, Greg Kroah-Hartman
Hi Peng, On Fri, Aug 01, 2025 at 12:34:23PM +0800, Peng Fan wrote:
quoted hunk ↗ jump to hunk
i.MX95 USB2 inside HSIOMIX could still wakeup Linux, even if HSIOMIX power domain(Digital logic) is off. There is still always on logic have the wakeup capability which is out band wakeup capbility. So use device_set_out_band_wakeup for i.MX95 to make sure usb2 could wakeup system even if HSIOMIX power domain is in off state. Signed-off-by: Peng Fan <peng.fan@nxp.com> --- drivers/usb/chipidea/ci_hdrc_imx.c | 8 ++++++++ include/linux/usb/chipidea.h | 1 + 2 files changed, 9 insertions(+)diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c index e1ec9b38f5b9ba0568101b51fbf16b99461b6ee2..7a3360d8a0fd065394393de829108a12c27c85b9 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.c +++ b/drivers/usb/chipidea/ci_hdrc_imx.c@@ -79,6 +79,10 @@ static const struct ci_hdrc_imx_platform_flag imx8ulp_usb_data = { CI_HDRC_HAS_PORTSC_PEC_MISSED, }; +static const struct ci_hdrc_imx_platform_flag imx95_usb_data = { + .flags = CI_HDRC_SUPPORTS_RUNTIME_PM | CI_HDRC_OUT_BAND_WAKEUP, +}; + static const struct ci_hdrc_imx_platform_flag s32g_usb_data = { .flags = CI_HDRC_DISABLE_HOST_STREAMING, };@@ -94,6 +98,7 @@ static const struct of_device_id ci_hdrc_imx_dt_ids[] = { { .compatible = "fsl,imx7d-usb", .data = &imx7d_usb_data}, { .compatible = "fsl,imx7ulp-usb", .data = &imx7ulp_usb_data}, { .compatible = "fsl,imx8ulp-usb", .data = &imx8ulp_usb_data}, + { .compatible = "fsl,imx95-usb", .data = &imx95_usb_data}, { .compatible = "nxp,s32g2-usb", .data = &s32g_usb_data}, { /* sentinel */ } };@@ -569,6 +574,9 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) device_set_wakeup_capable(dev, true); + if (pdata.flags & CI_HDRC_OUT_BAND_WAKEUP) + device_set_out_band_wakeup(dev, true); +
In current design, ci_hdrc_imx_probe() will create another platform device B which will be a child of current device A. Furthermore, device A and device B will attached to a same power domain. In this case, some conflict setting may happen. For example, if the user wants to enable wakeup for this USB port, they may echo "enabled" to wakeup file for both device A and device B as before. As a result, device A is out band wakeup so it doesn't depend on power domain on, but device B has also enabled wakeup so the power domain will keep on finally. Actually, the power domain needs to be off for imx95. So I think only letting the parent device A itself attach to power domain should be enough. If it's the right way, then below change needs to be included to avoid potential misbehavior.
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 694b4a8e4e1d..c2ca81fe5e09 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c@@ -915,6 +915,8 @@ struct platform_device *ci_hdrc_add_device(struct device *dev, if (ret) goto err; + dev_pm_domain_detach(&pdev->dev, false); + return pdev;
Thanks, Xu Yang
quoted hunk ↗ jump to hunk
return 0; disable_device:diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index e17ebeee24e3ecc4b1c2d153d9ea9b656b5a3d35..c6451191d2de68607a9380482701d11f949d0ff7 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h@@ -66,6 +66,7 @@ struct ci_hdrc_platform_data { #define CI_HDRC_HAS_PORTSC_PEC_MISSED BIT(17) #define CI_HDRC_FORCE_VBUS_ACTIVE_ALWAYS BIT(18) #define CI_HDRC_HAS_SHORT_PKT_LIMIT BIT(19) +#define CI_HDRC_OUT_BAND_WAKEUP BIT(20) enum usb_dr_mode dr_mode; #define CI_HDRC_CONTROLLER_RESET_EVENT 0 #define CI_HDRC_CONTROLLER_STOPPED_EVENT 1-- 2.37.1