Thread (31 messages) 31 messages, 6 authors, 2025-08-03

Re: [PATCH v2 2/9] thermal/drivers/mediatek/lvts: Make number of calibration offsets configurable

From: Fei Shao <hidden>
Date: 2025-07-31 03:10:54
Also in: linux-devicetree, linux-mediatek, linux-pm, lkml

On Wed, Jul 30, 2025 at 11:30 PM Laura Nao [off-list ref] wrote:
MT8196/MT6991 use 2-byte eFuse calibration data, whereas other SoCs
supported by the driver rely on 3 bytes. Make the number of calibration
bytes per sensor configurable, enabling support for SoCs with varying
calibration formats.

Signed-off-by: Laura Nao <redacted>
Reviewed-by: Fei Shao <redacted>
quoted hunk ↗ jump to hunk
---
 drivers/thermal/mediatek/lvts_thermal.c | 32 +++++++++++++++++--------
 1 file changed, 22 insertions(+), 10 deletions(-)
diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
index f4d1e66d7db9..05aa8895ccce 100644
--- a/drivers/thermal/mediatek/lvts_thermal.c
+++ b/drivers/thermal/mediatek/lvts_thermal.c
@@ -96,12 +96,14 @@

 #define LVTS_MINIMUM_THRESHOLD         20000

+#define LVTS_MAX_CAL_OFFSETS           3
+
 static int golden_temp = LVTS_GOLDEN_TEMP_DEFAULT;
 static int golden_temp_offset;

 struct lvts_sensor_data {
        int dt_id;
-       u8 cal_offsets[3];
+       u8 cal_offsets[LVTS_MAX_CAL_OFFSETS];
 };

 struct lvts_ctrl_data {
@@ -127,6 +129,7 @@ struct lvts_data {
        const struct lvts_ctrl_data *lvts_ctrl;
        const u32 *conn_cmd;
        const u32 *init_cmd;
+       int num_cal_offsets;
        int num_lvts_ctrl;
        int num_conn_cmd;
        int num_init_cmd;
@@ -711,7 +714,7 @@ static int lvts_calibration_init(struct device *dev, struct lvts_ctrl *lvts_ctrl
                                        u8 *efuse_calibration,
                                        size_t calib_len)
 {
-       int i;
+       int i, j;
        u32 gt;

        /* A zero value for gt means that device has invalid efuse data */
@@ -720,17 +723,18 @@ static int lvts_calibration_init(struct device *dev, struct lvts_ctrl *lvts_ctrl
        lvts_for_each_valid_sensor(i, lvts_ctrl_data) {
                const struct lvts_sensor_data *sensor =
                                        &lvts_ctrl_data->lvts_sensor[i];
+               u32 calib = 0;

-               if (sensor->cal_offsets[0] >= calib_len ||
-                   sensor->cal_offsets[1] >= calib_len ||
-                   sensor->cal_offsets[2] >= calib_len)
-                       return -EINVAL;
+               for (j = 0; j < lvts_ctrl->lvts_data->num_cal_offsets; j++) {
+                       u8 offset = sensor->cal_offsets[j];
+
+                       if (offset >= calib_len)
+                               return -EINVAL;
+                       calib |= efuse_calibration[offset] << (8 * j);
+               }

                if (gt) {
-                       lvts_ctrl->calibration[i] =
-                               (efuse_calibration[sensor->cal_offsets[0]] << 0) +
-                               (efuse_calibration[sensor->cal_offsets[1]] << 8) +
-                               (efuse_calibration[sensor->cal_offsets[2]] << 16);
+                       lvts_ctrl->calibration[i] = calib;
                } else if (lvts_ctrl->lvts_data->def_calibration) {
                        lvts_ctrl->calibration[i] = lvts_ctrl->lvts_data->def_calibration;
                } else {
@@ -1763,6 +1767,7 @@ static const struct lvts_data mt7988_lvts_ap_data = {
        .temp_factor    = LVTS_COEFF_A_MT7988,
        .temp_offset    = LVTS_COEFF_B_MT7988,
        .gt_calib_bit_offset = 24,
+       .num_cal_offsets = 3,
 };

 static const struct lvts_data mt8186_lvts_data = {
@@ -1776,6 +1781,7 @@ static const struct lvts_data mt8186_lvts_data = {
        .temp_offset    = LVTS_COEFF_B_MT7988,
        .gt_calib_bit_offset = 24,
        .def_calibration = 19000,
+       .num_cal_offsets = 3,
 };

 static const struct lvts_data mt8188_lvts_mcu_data = {
@@ -1789,6 +1795,7 @@ static const struct lvts_data mt8188_lvts_mcu_data = {
        .temp_offset    = LVTS_COEFF_B_MT8195,
        .gt_calib_bit_offset = 20,
        .def_calibration = 35000,
+       .num_cal_offsets = 3,
 };

 static const struct lvts_data mt8188_lvts_ap_data = {
@@ -1802,6 +1809,7 @@ static const struct lvts_data mt8188_lvts_ap_data = {
        .temp_offset    = LVTS_COEFF_B_MT8195,
        .gt_calib_bit_offset = 20,
        .def_calibration = 35000,
+       .num_cal_offsets = 3,
 };

 static const struct lvts_data mt8192_lvts_mcu_data = {
@@ -1815,6 +1823,7 @@ static const struct lvts_data mt8192_lvts_mcu_data = {
        .temp_offset    = LVTS_COEFF_B_MT8195,
        .gt_calib_bit_offset = 24,
        .def_calibration = 35000,
+       .num_cal_offsets = 3,
 };

 static const struct lvts_data mt8192_lvts_ap_data = {
@@ -1828,6 +1837,7 @@ static const struct lvts_data mt8192_lvts_ap_data = {
        .temp_offset    = LVTS_COEFF_B_MT8195,
        .gt_calib_bit_offset = 24,
        .def_calibration = 35000,
+       .num_cal_offsets = 3,
 };

 static const struct lvts_data mt8195_lvts_mcu_data = {
@@ -1841,6 +1851,7 @@ static const struct lvts_data mt8195_lvts_mcu_data = {
        .temp_offset    = LVTS_COEFF_B_MT8195,
        .gt_calib_bit_offset = 24,
        .def_calibration = 35000,
+       .num_cal_offsets = 3,
 };

 static const struct lvts_data mt8195_lvts_ap_data = {
@@ -1854,6 +1865,7 @@ static const struct lvts_data mt8195_lvts_ap_data = {
        .temp_offset    = LVTS_COEFF_B_MT8195,
        .gt_calib_bit_offset = 24,
        .def_calibration = 35000,
+       .num_cal_offsets = 3,
 };

 static const struct of_device_id lvts_of_match[] = {
--
2.39.5
  
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help