Re: [RESEND PATCH v9 1/4] PCI: rockchip: Use standard PCIe defines
From: Bjorn Helgaas <helgaas@kernel.org>
Date: 2025-07-07 22:22:12
Also in:
linux-pci, linux-phy, linux-rockchip, lkml
On Mon, Jun 30, 2025 at 07:24:41PM -0300, Geraldo Nascimento wrote:
Current code uses custom-defined register offsets and bitfields for standard PCIe registers. Change to using standard PCIe defines. Since we are now using standard PCIe defines, drop unused custom-defined ones, which are now referenced from offset at added Capabilities Register.
quoted hunk ↗ jump to hunk
@@ -278,10 +278,10 @@ static void rockchip_pcie_set_power_limit(struct rockchip_pcie *rockchip) power = power / 10; } - status = rockchip_pcie_read(rockchip, PCIE_RC_CONFIG_DCR); - status |= (power << PCIE_RC_CONFIG_DCR_CSPL_SHIFT) | - (scale << PCIE_RC_CONFIG_DCR_CPLS_SHIFT); - rockchip_pcie_write(rockchip, status, PCIE_RC_CONFIG_DCR); + status = rockchip_pcie_read(rockchip, PCIE_RC_CONFIG_CR + PCI_EXP_DEVCAP); + status |= FIELD_PREP(PCI_EXP_DEVCAP_PWR_VAL, power); + status |= FIELD_PREP(PCI_EXP_DEVCAP_PWR_SCL, scale);
Added #include <linux/bitfield.h> for this:
CC drivers/pci/controller/pcie-rockchip-host.o
drivers/pci/controller/pcie-rockchip-host.c: In function ‘rockchip_pcie_set_power_limit’:
drivers/pci/controller/pcie-rockchip-host.c:272:24: error: implicit declaration of function ‘FIELD_MAX’ [-Werror=implicit-function-declaration]
272 | while (power > FIELD_MAX(PCI_EXP_DEVCAP_PWR_VAL)) {
| ^~~~~~~~~
drivers/pci/controller/pcie-rockchip-host.c:282:19: error: implicit declaration of function ‘FIELD_PREP’ [-Werror=implicit-function-declaration]
282 | status |= FIELD_PREP(PCI_EXP_DEVCAP_PWR_VAL, power);
| ^~~~~~~~~~