Hi Peng,

On Wed, Jun 11, 2025 at 03:27:09AM +0000, Peng Fan wrote:

quoted

Sorry for the delay.

I tested it now and there must be something missing on my U-Boot:

Disable imx8x-cm4 rsrc 278 not owned
Disable imx8x-cm4 rsrc 297 not owned

It removes my nodes from the DT before starting the kernel, so I cannot
attach. Do you know what should I do in this case?

In separate partition case, UBoot will check the permission
by checking the rsrc-id, saying power domain id.

You may need to remove the power-domains property
from M4 node.

Without the power-domains property, rproc gives me a kernel panic:

[    1.253234] remoteproc remoteproc0: imx-rproc is available
[    1.258501] remoteproc remoteproc0: attaching to imx-rproc
[    1.263950] Unable to handle kernel paging request at virtual address ffff80005ae57d39
[    1.271812] Mem abort info:
[    1.274575]   ESR = 0x0000000096000005
[    1.278299]   EC = 0x25: DABT (current EL), IL = 32 bits
[    1.282581] mmc0: SDHCI controller on 5b010000.mmc [5b010000.mmc] using ADMA
[    1.283607]   SET = 0, FnV = 0
[    1.293701]   EA = 0, S1PTW = 0
[    1.296815]   FSC = 0x05: level 1 translation fault
[    1.301699] Data abort info:
[    1.304545]   ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
[    1.310079]   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[    1.315073]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[    1.320367] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000096bf3000
[    1.327061] [ffff80005ae57d39] pgd=0000000000000000, p4d=1000000097085003, pud=0000000000000000
[    1.335750] Internal error: Oops: 0000000096000005 [#1]  SMP
[    1.341373] Modules linked in:
[    1.344414] CPU: 3 UID: 0 PID: 47 Comm: kworker/u16:3 Not tainted 6.16.0-rc1-00024-gfe5d6ab20714-dirty
 #857 PREEMPT
[    1.354932] Hardware name: Toradex Colibri iMX8QXP on Colibri Evaluation Board V3 (DT)
[    1.362837] Workqueue: events_unbound deferred_probe_work_func
[    1.368651] pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    1.375601] pc : rproc_handle_resources.constprop.0+0x78/0x1d0
[    1.381421] lr : rproc_boot+0x368/0x578
[    1.385242] sp : ffff8000819f3990
[    1.388542] x29: ffff8000819f3990 x28: ffff80005ae57d3d x27: 0000000000000000
[    1.395671] x26: 0000000000000000 x25: ffff0000016ee038 x24: ffff800080f3c680
[    1.402793] x23: ffff8000813d6da8 x22: 00000000d999ad39 x21: ffff0000016ee000
[    1.409917] x20: 00000000266656c3 x19: ffff80005ae57d39 x18: 0000000000000006
[    1.417040] x17: ffff000002020600 x16: ffff000002020000 x15: 4addd15cca11c529
[    1.424164] x14: 73ebceed5d6cd787 x13: 4addd15cca11c529 x12: 73ebceed5d6cd787
[    1.431288] x11: 95a4e33b6b190664 x10: 9e3cdabdb09ca345 x9 : ab3734eafdd6fd1c
[    1.438412] x8 : d58a055de4cfb385 x7 : de97fab1791acbbe x6 : 9946d97107d0dcda
[    1.445535] x5 : ffff0000032b2c00 x4 : 00000000000003fc x3 : ffff0000032b2b80
[    1.452659] x2 : fffffffffffffff0 x1 : ffff8000814bd000 x0 : ffff8000814bd000
[    1.459786] Call trace:
[    1.462215]  rproc_handle_resources.constprop.0+0x78/0x1d0 (P)
[    1.468036]  rproc_boot+0x368/0x578
[    1.471510]  rproc_add+0x180/0x18c
[    1.474898]  imx_rproc_probe+0x3e4/0x540
[    1.475274] mmc0: new HS400 MMC card at address 0001
[    1.478799]  platform_probe+0x68/0xc0
[    1.484628] mmcblk0: mmc0:0001 Q2J55L 7.09 GiB
[    1.487400]  really_probe+0xc0/0x38c
[    1.487412]  __driver_probe_device+0x7c/0x15c
[    1.487424]  driver_probe_device+0x3c/0x10c
[    1.493941]  mmcblk0: p1 p2
[    1.495392]  __device_attach_driver+0xbc/0x158
[    1.495405]  bus_for_each_drv+0x84/0xe0
[    1.495417]  __device_attach+0x9c/0x1ac
[    1.500468] mmcblk0boot0: mmc0:0001 Q2J55L 16.0 MiB
[    1.503906]  device_initial_probe+0x14/0x20
[    1.503918]  bus_probe_device+0xac/0xb0
[    1.503929]  deferred_probe_work_func+0x9c/0xec
[    1.509863] mmcblk0boot1: mmc0:0001 Q2J55L 16.0 MiB
[    1.511117]  process_one_work+0x14c/0x28c
[    1.511132]  worker_thread+0x2cc/0x3d4
[    1.511142]  kthread+0x12c/0x208
[    1.511157]  ret_from_fork+0x10/0x20
[    1.517964] mmcblk0rpmb: mmc0:0001 Q2J55L 4.00 MiB, chardev (241:0)
[    1.518770] Code: 8b36c033 9100127c 54000924 d503201f (b9400261)
[    1.518777] ---[ end trace 0000000000000000 ]---

Currently I have the M4 partiton defined into the SCU code:

            /* Create partition */
            BRD_ERR(rm_partition_create(pt_boot, &pt_m4_0, SC_FALSE,
                SC_TRUE, SC_FALSE, SC_TRUE, SC_FALSE, SC_R_M4_0_PID0,
                rsrc_list, ARRAY_SIZE(rsrc_list),
                pad_list, ARRAY_SIZE(pad_list),
                NULL, 0));

            /* Name partition for debug */
            PARTITION_NAME(pt_m4_0, "MCU0");
            
            /* Allow AP to use SYSTEM (not production!) */
            BRD_ERR(rm_set_peripheral_permissions(SC_PT, SC_R_SYSTEM,
                pt_boot, SC_RM_PERM_SEC_RW));

            /* Move M4 0 TCM */
            BRD_ERR(rm_find_memreg(pt_boot, &mr, 0x034FE0000ULL,
                0x034FE0000ULL));
            BRD_ERR(rm_assign_memreg(pt_boot, pt_m4_0, mr));

            /* Move partition to be owned by SC */
            BRD_ERR(rm_set_parent(pt_boot, pt_m4_0, SC_PT));

            /* Check if booting with the no_ap flag set */
            if (no_ap != SC_FALSE)
            {
                /* Move boot to be owned by M4 0 for Android Automotive */
                BRD_ERR(rm_set_parent(SC_PT, pt_boot, pt_m4_0));
            }
        }

        /* Allow all to access the SEMA42s */
        BRD_ERR(rm_set_peripheral_permissions(SC_PT, SC_R_M4_0_SEMA42,
            SC_RM_PT_ALL, SC_RM_PERM_FULL));

I believe this SCU code is correct, at least this is more or less what
NXP provides as example, right?

Best Regards,
Hiago.