Re: [PATCH V2 4/4] arm64: dts: imx8mp: Configure VPU clocks for overdrive
From: Marco Felsch <hidden>
Date: 2025-06-12 13:17:02
Also in:
imx, linux-devicetree, lkml
On 25-06-11, Adam Ford wrote:
The defaults for this SoC are configured for overdrive mode, but the VPU clocks are currently configured for nominal mode. Increase VPU_G1_CLK_ROOT to 800MHZ from 600MHz, Increase VPU_G2_CLK_ROOT to 700MHZ from 500MHz, and Increase VPU_BUS_CLK_ROOT to 800MHz from 600MHz. This requires adjusting the clock parents. Since there is already 800MHz clock references, move the VPU_BUS and G1 clocks to it. This frees up the VPU_PLL to be configured at 700MHz to run the G2 clock at 700MHz. Signed-off-by: Adam Ford <redacted>
Reviewed-by: Marco Felsch <redacted>