[PATCH v2 4/6] arm64: dts: imx93-11x11-evk: disable all realtek ethernet phy CLKOUT
From: Frank Li <Frank.Li@nxp.com>
Date: 2025-06-09 16:53:07
Also in:
imx, linux-devicetree, lkml
Subsystem:
arm/freescale imx / mxc arm architecture, the rest · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
From: Clark Wang <xiaoning.wang@nxp.com> The realtek phy CLKOUT signal is not used. Disable it to save power. Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> --- change in v2 - add peng fan review tag --- arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
index 295eb8d90f03f..8688fcb382c06 100644
--- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts@@ -251,6 +251,7 @@ ethphy1: ethernet-phy@1 { reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>; reset-assert-us = <10000>; reset-deassert-us = <80000>; + realtek,clkout-disable; }; }; };
@@ -275,6 +276,7 @@ ethphy2: ethernet-phy@2 { reset-gpios = <&pcal6524 16 GPIO_ACTIVE_LOW>; reset-assert-us = <10000>; reset-deassert-us = <80000>; + realtek,clkout-disable; }; }; };
--
2.34.1