[PATCH] media: bcm2835-unicam: Remove RGB24 support

The RGB24 V4L2 format is defined as a pixel format with 8 bits per
components, with the components being in the red, green, and blue order
from left to right.

The RGB MIPI-CSI2 is defined in the specification (Section 11.3.1,
RGB888) with blue coming first, then green, then red. So the opposite of
what V4L2 means by RGB.

Since the hardware cannot reorder the components, this means that when
selecting the RGB24 format, you get inverted red and blue components
compared to what you'd expect.

The driver already supports BGR24, so we can simply remove the RGB24
format from the driver.

Fixes: 392cd78d495f ("media: bcm2835-unicam: Add support for CCP2/CSI2 camera interface")
Signed-off-by: Maxime Ripard <mripard@kernel.org>
---
 drivers/media/platform/broadcom/bcm2835-unicam.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/media/platform/broadcom/bcm2835-unicam.c b/drivers/media/platform/broadcom/bcm2835-unicam.c
index f10064107d543caf867249d0566a0f42d6d8c4c6..1f549019efd53c9aae83193e74f1a3601ebf274d 100644
--- a/drivers/media/platform/broadcom/bcm2835-unicam.c
+++ b/drivers/media/platform/broadcom/bcm2835-unicam.c

@@ -338,15 +338,10 @@ static const struct unicam_format_info unicam_image_formats[] = {
 	/* RGB Formats */
 		.fourcc		= V4L2_PIX_FMT_RGB565, /* gggbbbbb rrrrrggg */
 		.code		= MEDIA_BUS_FMT_RGB565_1X16,
 		.depth		= 16,
 		.csi_dt		= MIPI_CSI2_DT_RGB565,
-	}, {
-		.fourcc		= V4L2_PIX_FMT_RGB24, /* rgb */
-		.code		= MEDIA_BUS_FMT_RGB888_1X24,
-		.depth		= 24,
-		.csi_dt		= MIPI_CSI2_DT_RGB888,
 	}, {
 		.fourcc		= V4L2_PIX_FMT_BGR24, /* bgr */
 		.code		= MEDIA_BUS_FMT_BGR888_1X24,
 		.depth		= 24,
 		.csi_dt		= MIPI_CSI2_DT_RGB888,

---
base-commit: 0ff41df1cb268fc69e703a08a57ee14ae967d0ca
change-id: 20250606-rpi-unicam-rgb-bgr-fix-d1b6f46a75ad

Best regards,
-- 
Maxime Ripard [off-list ref]