Re: [PATCH 1/4] arm64: dts: rockchip: list all CPU supplies on ArmSoM Sige5
From: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Date: 2025-06-04 18:38:23
Also in:
linux-devicetree, linux-rockchip, lkml
On Tuesday, 3 June 2025 19:01:13 Central European Summer Time Alexey Charkov wrote:
quoted hunk ↗ jump to hunk
List both CPU supply regulators which drive the little and big CPU clusters, respectively, so that cpufreq can pick them up. Signed-off-by: Alexey Charkov <alchark@gmail.com> --- .../boot/dts/rockchip/rk3576-armsom-sige5.dts | 28 ++++++++++++++++++++++ 1 file changed, 28 insertions(+)diff --git a/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts b/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts index b09e789c75c47fec7cf7e9810ab0dcca32d9404a..d9c129be55a0d997e04e6d677cdc98fb50353418 100644 --- a/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts +++ b/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts@@ -207,6 +207,22 @@ vcc_3v3_ufs_s0: regulator-vcc-ufs-s0 { }; }; +&cpu_b0 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + &combphy0_ps { status = "okay"; };@@ -215,6 +231,18 @@ &cpu_l0 { cpu-supply = <&vdd_cpu_lit_s0>; }; +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + &gmac0 { phy-mode = "rgmii-id"; clock_in_out = "output";
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com> Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
so that cpufreq can pick them up.
Fwiw, even without this patch they're picked up by cpufreq-dt for me:
user@trixie:~$ sudo cpupower frequency-info
analyzing CPU 5:
driver: cpufreq-dt
CPUs which run at the same hardware frequency: 4 5 6 7
CPUs which need to have their frequency coordinated by software: 4 5 6 7
maximum transition latency: 40.0 us
hardware limits: 408 MHz - 2.30 GHz
available frequency steps: 408 MHz, 600 MHz, 816 MHz, 1.01 GHz, 1.20 GHz, 1.42 GHz, 1.61 GHz, 1.80 GHz, 2.02 GHz, 2.21 GHz, 2.30 GHz
available cpufreq governors: ondemand userspace performance schedutil
current policy: frequency should be within 408 MHz and 2.30 GHz.
The governor "schedutil" may decide which speed to use
within this range.
current CPU frequency: 1.61 GHz (asserted by call to hardware)
user@trixie:~$ uname -a
Linux trixie 6.15.0-11173-g546b1c9e93c2 #2 SMP PREEMPT Wed Jun 4 20:32:52 CEST 2025 aarch64 GNU/Linux
this is more correct though of course.
Kind regards,
Nicolas Frattaroli