[PATCH net-next v2 2/9] net: stmmac: mediatek: remove of_get_phy_mode()
From: Russell King (Oracle) <hidden>
Date: 2025-03-12 09:21:03
Also in:
linux-amlogic, linux-arm-msm, linux-mediatek, linux-sunxi, netdev
Subsystem:
networking drivers, stmmac ethernet driver, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
devm_stmmac_probe_config_dt() already gets the PHY mode from firmware, which is stored in plat_dat->phy_interface. Therefore, we don't need to get it in platform code. Initialise priv_plat->phy_mode from plat->phy_interface inmediatek_dwmac_common_data(). Reviewed-by: Michal Kubiak <redacted> Signed-off-by: Russell King (Oracle) <redacted> --- drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
index c9636832a570..d178d5ddc7c7 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c@@ -456,7 +456,6 @@ static int mediatek_dwmac_config_dt(struct mediatek_dwmac_plat_data *plat) { struct mac_delay_struct *mac_delay = &plat->mac_delay; u32 tx_delay_ps, rx_delay_ps; - int err; plat->peri_regmap = syscon_regmap_lookup_by_phandle(plat->np, "mediatek,pericfg"); if (IS_ERR(plat->peri_regmap)) {
@@ -464,12 +463,6 @@ static int mediatek_dwmac_config_dt(struct mediatek_dwmac_plat_data *plat) return PTR_ERR(plat->peri_regmap); } - err = of_get_phy_mode(plat->np, &plat->phy_mode); - if (err) { - dev_err(plat->dev, "not find phy-mode\n"); - return err; - } - if (!of_property_read_u32(plat->np, "mediatek,tx-delay-ps", &tx_delay_ps)) { if (tx_delay_ps < plat->variant->tx_delay_max) { mac_delay->tx_delay = tx_delay_ps;
@@ -587,6 +580,7 @@ static int mediatek_dwmac_common_data(struct platform_device *pdev, { int i; + priv_plat->phy_mode = plat->phy_interface; plat->mac_interface = priv_plat->phy_mode; if (priv_plat->mac_wol) plat->flags &= ~STMMAC_FLAG_USE_PHY_WOL;
--
2.30.2