[PATCH 3/8] arm64: dts: imx8dxl-evk: Add pcie0-ep node and use unified pcie0 label
From: Frank Li <Frank.Li@nxp.com>
Date: 2025-03-31 19:03:14
Also in:
imx, linux-devicetree, lkml
Subsystem:
arm/freescale imx / mxc arm architecture, the rest · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
Use unified pcie0 label and add pcie0-ep node. Signed-off-by: Frank Li <Frank.Li@nxp.com> --- arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
index 5f3b4014e1521..b6d64d3906eaf 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts@@ -642,7 +642,7 @@ &lsio_gpio5 { status = "okay"; }; -&pcieb { +&pcie0 { phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>; phy-names = "pcie-phy"; pinctrl-0 = <&pinctrl_pcieb>;
@@ -652,6 +652,16 @@ &pcieb { status = "okay"; }; +&pcie0_ep{ + phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>; + phy-names = "pcie-phy"; + pinctrl-0 = <&pinctrl_pcieb>; + pinctrl-names = "default"; + reset-gpio = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_pcieb>; + status = "disabled"; +}; + &sai0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai0>;
--
2.34.1