[PATCH v1] arm64: dts: ti: k3-j784s4-main: Enable ACSPCIE outputs for PCIe interfaces
From: Parth Pancholi <hidden>
Date: 2025-03-20 12:23:18
Also in:
linux-devicetree, lkml
Subsystem:
arm/texas instruments k3 architecture, the rest · Maintainers:
Nishanth Menon, Vignesh Raghavendra, Tero Kristo, Linus Torvalds
From: Parth Pancholi <redacted>
TI J784S4-based devices, such as the AM69 SoC, provide PCIE_REFCLK outputs
from the SoC, which can be used to clock external PCIe endpoint devices.
Each PCIE_REFCLK output is enabled via the corresponding ACSPCIE clock buffer,
with each buffer supporting two PADs to provide reference clocks for two
associated PCIe instances. The mappings are as follows:
- PCIe0 -> ACSPCIE1 PAD0
- PCIe1 -> ACSPCIE0 PAD0
- PCIe2 -> ACSPCIE1 PAD1
- PCIe3 -> ACSPCIE0 PAD1
This patch enables each ACSPCIE module and its corresponding PADs to ensure
that all PCIE_REFCLK outputs are functional.
This change have been tested on an AM69-based custom hardware platform,
where all four PCIe instances (PCIe0, PCIe1, PCIe2, and PCIe3) with the
internal PCIE_REFCLK are utilized with various endpoint devices such as
a WiFi card, NVMe SSD, and PCIe-to-USB bridge.
Link: https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1484211/am69-pcie-refclk-out-and-acspcie-mappings
Signed-off-by: Parth Pancholi <redacted>
---
This change depends on https://lore.kernel.org/all/20241209085157.1203168-1-s-vadapalli@ti.com/ (local)
---
.../boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi | 10 ++++++++--
arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 10 ++++++----
2 files changed, 14 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi
index 591609f3194c..854fdf7b771e 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi@@ -132,6 +132,11 @@ acspcie0_proxy_ctrl: clock-controller@1a090 { compatible = "ti,j784s4-acspcie-proxy-ctrl", "syscon"; reg = <0x1a090 0x4>; }; + + acspcie1_proxy_ctrl: clock-controller@1a094 { + compatible = "ti,j784s4-acspcie-proxy-ctrl", "syscon"; + reg = <0x1a094 0x4>; + }; }; main_ehrpwm0: pwm@3000000 {
@@ -1067,11 +1072,12 @@ pcie0_rc: pcie@2900000 { interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>; device_type = "pci"; ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x0>; + ti,syscon-acspcie-proxy-ctrl = <&acspcie1_proxy_ctrl 0x1>; max-link-speed = <3>; num-lanes = <4>; power-domains = <&k3_pds 332 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 332 0>; - clock-names = "fck"; + clocks = <&k3_clks 332 0>, <&serdes1 CDNS_TORRENT_REFCLK_DRIVER>; + clock-names = "fck", "pcie_refclk"; #address-cells = <3>; #size-cells = <2>; bus-range = <0x0 0xff>;
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
index 0160fe0da983..ebbc315649d0 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi@@ -34,8 +34,8 @@ pcie2_rc: pcie@2920000 { max-link-speed = <3>; num-lanes = <2>; power-domains = <&k3_pds 334 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 334 0>; - clock-names = "fck"; + clocks = <&k3_clks 334 0>, <&serdes1 CDNS_TORRENT_REFCLK_DRIVER>; + clock-names = "fck", "pcie_refclk"; #address-cells = <3>; #size-cells = <2>; bus-range = <0x0 0xff>;
@@ -45,6 +45,7 @@ pcie2_rc: pcie@2920000 { dma-coherent; dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>; ti,syscon-pcie-ctrl = <&pcie2_ctrl 0x0>; + ti,syscon-acspcie-proxy-ctrl = <&acspcie1_proxy_ctrl 0x3>; status = "disabled"; };
@@ -63,8 +64,8 @@ pcie3_rc: pcie@2930000 { max-link-speed = <3>; num-lanes = <2>; power-domains = <&k3_pds 335 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 335 0>; - clock-names = "fck"; + clocks = <&k3_clks 335 0>, <&serdes0 CDNS_TORRENT_REFCLK_DRIVER>; + clock-names = "fck", "pcie_refclk"; #address-cells = <3>; #size-cells = <2>; bus-range = <0x0 0xff>;
@@ -74,6 +75,7 @@ pcie3_rc: pcie@2930000 { dma-coherent; dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>; ti,syscon-pcie-ctrl = <&pcie3_ctrl 0x0>; + ti,syscon-acspcie-proxy-ctrl = <&acspcie0_proxy_ctrl 0x3>; status = "disabled"; };
--
2.34.1