在 2025/3/19 16:26, Krzysztof Kozlowski 写道:

[You don't often get email fromkrzk@kernel.org. Learn why this is important athttps://aka.ms/LearnAboutSenderIdentification ]

[ EXTERNAL EMAIL ]

On Wed, Mar 19, 2025 at 03:04:49PM +0800, jiebing chen wrote:

quoted

Add basic audio driver support for the Amlogic S4 based
Amlogic AQ222 board. use hifipll pll (1179648000) to
support 768k sample rate and 24 bit (s24_le), 24bit sclk
is 48fs, use mpll0 (270950400) to support 705.6k sample
rate and 32bit, use mpll1 (338688000) to support 705.6k
and 24bit.

Please wrap commit message according to Linux coding style / submission
process (neither too early nor over the limit):
https://elixir.bootlin.com/linux/v6.4-rc1/source/Documentation/process/submitting-patches.rst#L597

quoted

Signed-off-by: jiebing chen<redacted>

...

quoted

+
+             dai-link-12 {
+                     sound-dai = <&toacodec TOACODEC_OUT>;
+
+                     codec {
+                             sound-dai = <&acodec>;
+                     };
+             };
+     };
+

Do not add stray blank lines.

quoted

  };

  &pwm_ef {

diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
index 957577d986c0675a503115e1ccbc4387c2051620..83edafc2646438e3e6b1945fa1c4b327254a4131 100644
--- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi

@@ -11,7 +11,11 @@
  #include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h>
  #include <dt-bindings/power/meson-s4-power.h>
  #include <dt-bindings/reset/amlogic,meson-s4-reset.h>
-

Why?

quoted

+#include <dt-bindings/clock/axg-audio-clkc.h>
+#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
+#include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h>
+#include <dt-bindings/sound/meson-g12a-toacodec.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>

Old style was correct.

quoted

  / {
       cpus {
               #address-cells = <2>;

@@ -46,6 +50,36 @@ cpu3: cpu@3 {
               };
       };

+     tdmif_a: audio-controller-0 {
+             compatible = "amlogic,axg-tdm-iface";
+             #sound-dai-cells = <0>;
+             sound-name-prefix = "TDM_A";
+             clocks = <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+                      <&clkc_audio AUD_CLKID_MST_A_LRCLK>,
+                      <&clkc_audio AUD_CLKID_MST_A_MCLK>;
+             clock-names = "sclk", "lrclk","mclk";
+     };
+
+     tdmif_b: audio-controller-1 {
+             compatible = "amlogic,axg-tdm-iface";
+             #sound-dai-cells = <0>;
+             sound-name-prefix = "TDM_B";
+             clocks = <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+                      <&clkc_audio AUD_CLKID_MST_B_LRCLK>,
+                      <&clkc_audio AUD_CLKID_MST_B_MCLK>;
+             clock-names = "sclk", "lrclk","mclk";
+     };
+
+     tdmif_c: audio-controller-2 {
+             compatible = "amlogic,axg-tdm-iface";
+             #sound-dai-cells = <0>;
+             sound-name-prefix = "TDM_C";
+             clocks = <&clkc_audio AUD_CLKID_MST_C_SCLK>,
+                      <&clkc_audio AUD_CLKID_MST_C_LRCLK>,
+                      <&clkc_audio AUD_CLKID_MST_C_MCLK>;
+             clock-names = "sclk", "lrclk","mclk";
+     };
+
       timer {
               compatible = "arm,armv8-timer";
               interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,

@@ -101,7 +135,6 @@ apb4: bus@fe000000 {
                       #address-cells = <2>;
                       #size-cells = <2>;
                       ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
-

Why? What is happening in this patch - why are you changing so many
other pieces?

Hi, Krzysztof

for last versions ,it it not match the amlogic,axg-tdm-iface.yaml

so we must be change the order, otherwise a warning will be thrown，we 
copy the dts config from merged dts

the old order not meet the dt-binding rule, Another change, we only add 
the audio clock reg

+ compatible = "amlogic,s4-audio-clkc"; + reg = <0x0 0x0 0x0 0xd8>,

add <0x0 0xE80 0x0 0x10>;

We have not made any changes to the rest


arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dtb: audio-controller-0: clock-names:0: 'sclk' was expected
         from schema $id:http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml#
arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dtb: audio-controller-0: clock-names:1: 'lrclk' was expected
         from schema $id:http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml#
arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dtb: audio-controller-0: clock-names:2: 'mclk' was expected

quoted

                       clkc_periphs: clock-controller@0 {
                               compatible = "amlogic,s4-peripherals-clkc";
                               reg = <0x0 0x0 0x0 0x49c>;

@@ -134,6 +167,17 @@ clkc_pll: clock-controller@8000 {
                               #clock-cells = <1>;
                       };

+                     acodec: audio-controller@1a000 {
+                             compatible = "amlogic,t9015";
+                             reg = <0x0 0x1A000 0x0 0x14>;
+                             #sound-dai-cells = <0>;
+                             sound-name-prefix = "ACODEC";
+                             clocks = <&clkc_periphs CLKID_ACODEC>;
+                             clock-names = "pclk";
+                             resets = <&reset RESET_ACODEC>;
+                             AVDD-supply = <&vddio_ao1v8>;
+                     };
+
                       watchdog@2100 {
                               compatible = "amlogic,s4-wdt", "amlogic,t7-wdt";
                               reg = <0x0 0x2100 0x0 0x10>;

@@ -850,3 +894,327 @@ emmc: mmc@fe08c000 {
               };
       };
  };
+
+&apb4 {
+     audio: bus@330000 {
+             compatible = "simple-bus";
+             reg = <0x0 0x330000 0x0 0x1000>;

That's not a simple bus in such case.

NAK


Best regards,
Krzysztof