Re: [PATCH v2 3/4] pinctrl: samsung: add gs101 specific eint suspend/resume callbacks
From: André Draszik <andre.draszik@linaro.org>
Date: 2025-03-06 15:12:35
Also in:
linux-gpio, linux-samsung-soc, lkml, stable
On Sat, 2025-03-01 at 11:43 +0000, Peter Griffin wrote:
quoted hunk ↗ jump to hunk
gs101 differs to other SoCs in that fltcon1 register doesn't always exist. Additionally the offset of fltcon0 is not fixed and needs to use the newly added eint_fltcon_offset variable. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Fixes: 4a8be01a1a7a ("pinctrl: samsung: Add gs101 SoC pinctrl configuration") Cc: stable@vger.kernel.org --- drivers/pinctrl/samsung/pinctrl-exynos-arm64.c | 24 ++++----- drivers/pinctrl/samsung/pinctrl-exynos.c | 71 ++++++++++++++++++++++++++ drivers/pinctrl/samsung/pinctrl-exynos.h | 2 + 3 files changed, 85 insertions(+), 12 deletions(-)diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c index 57c98d2451b5..fca447ebc5f5 100644 --- a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c +++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c@@ -1455,15 +1455,15 @@ static const struct samsung_pin_ctrl gs101_pin_ctrl[] __initconst = {.pin_banks = gs101_pin_alive, .nr_banks = ARRAY_SIZE(gs101_pin_alive), .eint_wkup_init = exynos_eint_wkup_init, - .suspend = exynos_pinctrl_suspend, - .resume = exynos_pinctrl_resume, + .suspend = gs101_pinctrl_suspend, + .resume = gs101_pinctrl_resume, }, { /* pin banks of gs101 pin-controller (FAR_ALIVE) */ .pin_banks = gs101_pin_far_alive, .nr_banks = ARRAY_SIZE(gs101_pin_far_alive), .eint_wkup_init = exynos_eint_wkup_init, - .suspend = exynos_pinctrl_suspend, - .resume = exynos_pinctrl_resume, + .suspend = gs101_pinctrl_suspend, + .resume = gs101_pinctrl_resume, }, { /* pin banks of gs101 pin-controller (GSACORE) */ .pin_banks = gs101_pin_gsacore,@@ -1477,29 +1477,29 @@ static const struct samsung_pin_ctrl gs101_pin_ctrl[] __initconst = {.pin_banks = gs101_pin_peric0, .nr_banks = ARRAY_SIZE(gs101_pin_peric0), .eint_gpio_init = exynos_eint_gpio_init, - .suspend = exynos_pinctrl_suspend, - .resume = exynos_pinctrl_resume, + .suspend = gs101_pinctrl_suspend, + .resume = gs101_pinctrl_resume, }, { /* pin banks of gs101 pin-controller (PERIC1) */ .pin_banks = gs101_pin_peric1, .nr_banks = ARRAY_SIZE(gs101_pin_peric1), .eint_gpio_init = exynos_eint_gpio_init, - .suspend = exynos_pinctrl_suspend, - .resume = exynos_pinctrl_resume, + .suspend = gs101_pinctrl_suspend, + .resume = gs101_pinctrl_resume, }, { /* pin banks of gs101 pin-controller (HSI1) */ .pin_banks = gs101_pin_hsi1, .nr_banks = ARRAY_SIZE(gs101_pin_hsi1), .eint_gpio_init = exynos_eint_gpio_init, - .suspend = exynos_pinctrl_suspend, - .resume = exynos_pinctrl_resume, + .suspend = gs101_pinctrl_suspend, + .resume = gs101_pinctrl_resume, }, { /* pin banks of gs101 pin-controller (HSI2) */ .pin_banks = gs101_pin_hsi2, .nr_banks = ARRAY_SIZE(gs101_pin_hsi2), .eint_gpio_init = exynos_eint_gpio_init, - .suspend = exynos_pinctrl_suspend, - .resume = exynos_pinctrl_resume, + .suspend = gs101_pinctrl_suspend, + .resume = gs101_pinctrl_resume, }, };diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c index d65a9fba0781..ddc7245ec2e5 100644 --- a/drivers/pinctrl/samsung/pinctrl-exynos.c +++ b/drivers/pinctrl/samsung/pinctrl-exynos.c@@ -801,6 +801,41 @@ void exynos_pinctrl_suspend(struct samsung_pin_bank *bank)} } +void gs101_pinctrl_suspend(struct samsung_pin_bank *bank) +{ + struct exynos_eint_gpio_save *save = bank->soc_priv; + const void __iomem *regs = bank->eint_base; + + exynos_set_wakeup(bank);
As for patch 2, would be good to have this if / else, to make it more obvious that this is conditional, too.
quoted hunk ↗ jump to hunk
+ + if (bank->eint_type == EINT_TYPE_GPIO) { + save->eint_con = readl(regs + EXYNOS_GPIO_ECON_OFFSET + + bank->eint_offset); + + save->eint_fltcon0 = readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET + + bank->eint_fltcon_offset);
If there's another version, maybe align style where the '+' is placed (end of line vs start of line). It seems this file generally uses + at start of line.
quoted hunk ↗ jump to hunk
+ + /* fltcon1 register only exists for pins 4-7 */ + if (bank->nr_pins > 4) + save->eint_fltcon1 = readl(regs + + EXYNOS_GPIO_EFLTCON_OFFSET + + bank->eint_fltcon_offset + 4); + + save->eint_mask = readl(regs + bank->irq_chip->eint_mask + + bank->eint_offset); + + pr_debug("%s: save con %#010x\n", + bank->name, save->eint_con); + pr_debug("%s: save fltcon0 %#010x\n", + bank->name, save->eint_fltcon0); + if (bank->nr_pins > 4) + pr_debug("%s: save fltcon1 %#010x\n", + bank->name, save->eint_fltcon1); + pr_debug("%s: save mask %#010x\n", + bank->name, save->eint_mask); + } +} + void exynosautov920_pinctrl_suspend(struct samsung_pin_bank *bank) { struct exynos_eint_gpio_save *save = bank->soc_priv;@@ -820,6 +855,42 @@ void exynosautov920_pinctrl_suspend(struct samsung_pin_bank *bank)} } +void gs101_pinctrl_resume(struct samsung_pin_bank *bank) +{ + struct exynos_eint_gpio_save *save = bank->soc_priv; + + void __iomem *regs = bank->eint_base; + void __iomem *eint_fltcfg0 = regs + EXYNOS_GPIO_EFLTCON_OFFSET + + bank->eint_fltcon_offset; + + if (bank->eint_type == EINT_TYPE_GPIO) { + pr_debug("%s: con %#010x => %#010x\n", bank->name, + readl(regs + EXYNOS_GPIO_ECON_OFFSET + + bank->eint_offset), save->eint_con); + + pr_debug("%s: fltcon0 %#010x => %#010x\n", bank->name, + readl(eint_fltcfg0), save->eint_fltcon0); + + /* fltcon1 register only exists for pins 4-7 */ + if (bank->nr_pins > 4) { + pr_debug("%s: fltcon1 %#010x => %#010x\n", bank->name, + readl(eint_fltcfg0 + 4), save->eint_fltcon1); + }
If there's another version, braces are not needed here. Cheers, Andre'
quoted hunk ↗ jump to hunk
+ pr_debug("%s: mask %#010x => %#010x\n", bank->name, + readl(regs + bank->irq_chip->eint_mask + + bank->eint_offset), save->eint_mask); + + writel(save->eint_con, regs + EXYNOS_GPIO_ECON_OFFSET + + bank->eint_offset); + writel(save->eint_fltcon0, eint_fltcfg0); + + if (bank->nr_pins > 4) + writel(save->eint_fltcon1, eint_fltcfg0 + 4); + writel(save->eint_mask, regs + bank->irq_chip->eint_mask + + bank->eint_offset); + } +} + void exynos_pinctrl_resume(struct samsung_pin_bank *bank) { struct exynos_eint_gpio_save *save = bank->soc_priv;diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.h b/drivers/pinctrl/samsung/pinctrl-exynos.h index 35c2bc4ea488..773f161a82a3 100644 --- a/drivers/pinctrl/samsung/pinctrl-exynos.h +++ b/drivers/pinctrl/samsung/pinctrl-exynos.h@@ -225,6 +225,8 @@ void exynosautov920_pinctrl_resume(struct samsung_pin_bank *bank);void exynosautov920_pinctrl_suspend(struct samsung_pin_bank *bank); void exynos_pinctrl_suspend(struct samsung_pin_bank *bank); void exynos_pinctrl_resume(struct samsung_pin_bank *bank); +void gs101_pinctrl_suspend(struct samsung_pin_bank *bank); +void gs101_pinctrl_resume(struct samsung_pin_bank *bank); struct samsung_retention_ctrl * exynos_retention_init(struct samsung_pinctrl_drv_data *drvdata, const struct samsung_retention_data *data);