Am Dienstag, 4. März 2025, 19:13:10 MEZ schrieb Jonas Karlman:

Hi Heiko,

On 2025-03-04 13:02, Heiko Stuebner wrote:

quoted

On Fri, 28 Feb 2025 06:40:06 +0000, Jonas Karlman wrote:

quoted

The Radxa E20C has three gpio leds and one gpio button.

This series adds dt-binding, driver support, DT node in SoC .dtsi and
gpio-keys and gpio-leds nodes in board DT to support the leds and user
button.

This series builds on top of the "rockchip: Add support for maskrom
button on Radxa E20C" series [1].

[...]

Applied, thanks!

[1/7] dt-bindings: soc: rockchip: Add RK3528 ioc grf syscon
      commit: ac32ad07a97648eb8330b2c4cb840b0ef46903ae
[4/7] arm64: dts: rockchip: Add pinctrl and gpio nodes for RK3528
      commit: a31fad19ae39ea27b5068e3b02bcbf30a905339b
[5/7] arm64: dts: rockchip: Add uart0 pinctrl to Radxa E20C
      commit: 0d2312f0d3e4ce74af0977c1519a07dfc71a82ac

Patches 6+7 depend on the parallel saradc support series and thus
do not apply - and need too much rework to safely apply.

Do you want me to rebase/reorder and send an updated version with
remaining patches? Look like the iio saradc patches [2] is pending apply
so maybe not needed?

Not sure how long the that test run will be taking ...
and where after -rc5. But in theory things should be fine though.

So essentially up to you - and if you actually have spare minutes.

Heiko