Re: [PATCH v2 1/2] media: amphion: Reduce decoding latency for HEVC decoder
From: Sebastian Fricke <hidden>
Date: 2025-02-26 09:46:25
Also in:
imx, linux-media, lkml
Hey Ming, thank you for the patch! On 17.01.2025 16:57, Ming Qian wrote:
The amphion decoder firmware supports low latency flush mode for HEVC format since v1.9.0, it can help reduce the decoding latency by appending some padding data after every frame, then driver can enable this feature when the display delay 0 is enabled.
I see that you already changed the commit message for this version, but
I still have a few recommendations for the description:
The amphion decoder firmware supports a low latency flush mode for
the HEVC format since v1.9.0. This feature, which is enabled when
the display delay is set to 0, can help to reduce the decoding
latency by appending some padding data to every frame.
The rest looks good to me.
Regards,
Sebastian
quoted hunk ↗ jump to hunk
Signed-off-by: Ming Qian <redacted> --- v2 - Improve commit message - Add firmware version check drivers/media/platform/amphion/vpu_malone.c | 22 ++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-)diff --git a/drivers/media/platform/amphion/vpu_malone.c b/drivers/media/platform/amphion/vpu_malone.c index 5c6b2a841b6f..1d9e10d9bec1 100644 --- a/drivers/media/platform/amphion/vpu_malone.c +++ b/drivers/media/platform/amphion/vpu_malone.c@@ -68,6 +68,9 @@#define MALONE_DEC_FMT_RV_MASK BIT(21) +#define MALONE_VERSION_MASK 0xFFFFF +#define MALONE_MIN_VERSION_HEVC_BUFFLUSH (((1 << 16) | (9 << 8) | 0) & MALONE_VERSION_MASK) + enum vpu_malone_stream_input_mode { INVALID_MODE = 0, FRAME_LVL,@@ -332,6 +335,8 @@ struct vpu_dec_ctrl {u32 buf_addr[VID_API_NUM_STREAMS]; }; +static const struct malone_padding_scode *get_padding_scode(u32 type, u32 fmt); + u32 vpu_malone_get_data_size(void) { return sizeof(struct vpu_dec_ctrl);@@ -654,9 +659,16 @@ static int vpu_malone_set_params(struct vpu_shared_addr *shared,hc->jpg[instance].jpg_mjpeg_interlaced = 0; } - hc->codec_param[instance].disp_imm = params->display_delay_enable ? 1 : 0; - if (malone_format != MALONE_FMT_AVC) + if (params->display_delay_enable && + get_padding_scode(SCODE_PADDING_BUFFLUSH, params->codec_format)) + hc->codec_param[instance].disp_imm = 1; + else hc->codec_param[instance].disp_imm = 0; + + if (params->codec_format == V4L2_PIX_FMT_HEVC && + (iface->fw_version & MALONE_VERSION_MASK) < MALONE_MIN_VERSION_HEVC_BUFFLUSH) + hc->codec_param[instance].disp_imm = 0; + hc->codec_param[instance].dbglog_enable = 0; iface->dbglog_desc.level = 0;@@ -1024,6 +1036,7 @@ static const struct malone_padding_scode padding_scodes[] = {{SCODE_PADDING_EOS, V4L2_PIX_FMT_JPEG, {0x0, 0x0}}, {SCODE_PADDING_BUFFLUSH, V4L2_PIX_FMT_H264, {0x15010000, 0x0}}, {SCODE_PADDING_BUFFLUSH, V4L2_PIX_FMT_H264_MVC, {0x15010000, 0x0}}, + {SCODE_PADDING_BUFFLUSH, V4L2_PIX_FMT_HEVC, {0x3e010000, 0x20}}, }; static const struct malone_padding_scode padding_scode_dft = {0x0, 0x0};@@ -1058,8 +1071,11 @@ static int vpu_malone_add_padding_scode(struct vpu_buffer *stream_buffer,int ret; ps = get_padding_scode(scode_type, pixelformat); - if (!ps) + if (!ps) { + if (scode_type == SCODE_PADDING_BUFFLUSH) + return 0; return -EINVAL; + } wptr = readl(&str_buf->wptr); if (wptr < stream_buffer->phys || wptr > stream_buffer->phys + stream_buffer->length) -- 2.43.0-rc1