[PATCH v11 3/3] riscv: dts: allwinner: d1: Add pwm node
From: Aleksandr Shubin <hidden>
Date: 2025-02-13 09:41:13
Also in:
linux-devicetree, linux-pwm, linux-riscv, linux-sunxi, lkml
Subsystem:
risc-v architecture, the rest · Maintainers:
Paul Walmsley, Palmer Dabbelt, Albert Ou, Linus Torvalds
D1 and T113s contain a pwm controller with 8 channels. This controller is supported by the sun20i-pwm driver. Add a device tree node for it. Signed-off-by: Aleksandr Shubin <redacted> --- arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
index e4175adb028d..2c26cb8b2b07 100644
--- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
+++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi@@ -145,6 +145,18 @@ uart3_pb_pins: uart3-pb-pins { }; }; + pwm: pwm@2000c00 { + compatible = "allwinner,sun20i-d1-pwm"; + reg = <0x02000c00 0x400>; + clocks = <&ccu CLK_BUS_PWM>, + <&dcxo>, + <&ccu CLK_APB0>; + clock-names = "bus", "hosc", "apb"; + resets = <&ccu RST_BUS_PWM>; + status = "disabled"; + #pwm-cells = <0x3>; + }; + ccu: clock-controller@2001000 { compatible = "allwinner,sun20i-d1-ccu"; reg = <0x2001000 0x1000>;
--
2.25.1