[PATCH v8 3/9] ARM: dts: aspeed: system1: Add IPMB device
From: Ninad Palsule <ninad@linux.ibm.com>
Date: 2025-02-04 18:44:20
Also in:
linux-aspeed, linux-devicetree, linux-gpio, lkml
Subsystem:
arm/aspeed machine support, the rest · Maintainers:
Joel Stanley, Andrew Jeffery, Linus Torvalds
Add IPMB device sitting behind PCH module Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Ninad Palsule <ninad@linux.ibm.com> --- arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
index 360b9ce3c850..53d0abece02c 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts@@ -763,6 +763,15 @@ i2c3mux0chn7: i2c@7 { &i2c4 { status = "okay"; + multi-master; + bus-frequency = <1000000>; + + ipmb@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + + i2c-protocol; + }; }; &i2c5 {
--
2.43.0