[PATCH v3 3/5] drm/rockchip: vop2: Improve display modes handling on RK3588 HDMI0
From: Cristian Ciocaltea <hidden>
Date: 2025-02-04 12:40:24
Also in:
dri-devel, linux-devicetree, linux-rockchip, lkml
Subsystem:
arm/rockchip soc support, drm drivers, drm drivers and misc gpu patches, drm drivers for rockchip, the rest · Maintainers:
Heiko Stuebner, David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Sandy Huang, Andy Yan, Linus Torvalds
The RK3588 specific implementation is currently quite limited in terms of handling the full range of display modes supported by the connected screens, e.g. 2560x1440@75Hz, 2048x1152@60Hz, 1024x768@60Hz are just a few of them. Additionally, it doesn't cope well with non-integer refresh rates like 59.94, 29.97, 23.98, etc. Make use of HDMI0 PHY PLL as a more accurate DCLK source to handle all display modes up to 4K@60Hz. Tested-by: FUKAUMI Naoki <redacted> Signed-off-by: Cristian Ciocaltea <redacted> --- drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 34 ++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+)
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
index 2455d4a55abd6751d54b7c6ecad3dda8a614bd36..afc946ead87091373605e59dbca281a9e91bea57 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c@@ -159,6 +159,7 @@ struct vop2_video_port { struct drm_crtc crtc; struct vop2 *vop2; struct clk *dclk; + struct clk *dclk_src; unsigned int id; const struct vop2_video_port_data *data;
@@ -214,6 +215,7 @@ struct vop2 { struct clk *hclk; struct clk *aclk; struct clk *pclk; + struct clk *pll_hdmiphy0; /* optional internal rgb encoder */ struct rockchip_rgb *rgb;
@@ -222,6 +224,8 @@ struct vop2 { struct vop2_win win[]; }; +#define VOP2_MAX_DCLK_RATE 600000000 + #define vop2_output_if_is_hdmi(x) ((x) == ROCKCHIP_VOP2_EP_HDMI0 || \ (x) == ROCKCHIP_VOP2_EP_HDMI1)
@@ -1155,6 +1159,9 @@ static void vop2_crtc_atomic_disable(struct drm_crtc *crtc, vop2_crtc_disable_irq(vp, VP_INT_DSP_HOLD_VALID); + if (vp->dclk_src) + clk_set_parent(vp->dclk, vp->dclk_src); + clk_disable_unprepare(vp->dclk); vop2->enable_count--;
@@ -2259,6 +2266,27 @@ static void vop2_crtc_atomic_enable(struct drm_crtc *crtc, vop2_vp_write(vp, RK3568_VP_MIPI_CTRL, 0); + /* + * Switch to HDMI PHY PLL as DCLK source for display modes up + * to 4K@60Hz, if available, otherwise keep using the system CRU. + */ + if (vop2->pll_hdmiphy0 && clock <= VOP2_MAX_DCLK_RATE) { + drm_for_each_encoder_mask(encoder, crtc->dev, crtc_state->encoder_mask) { + struct rockchip_encoder *rkencoder = to_rockchip_encoder(encoder); + + if (rkencoder->crtc_endpoint_id == ROCKCHIP_VOP2_EP_HDMI0) { + if (!vp->dclk_src) + vp->dclk_src = clk_get_parent(vp->dclk); + + ret = clk_set_parent(vp->dclk, vop2->pll_hdmiphy0); + if (ret < 0) + drm_warn(vop2->drm, + "Could not switch to HDMI0 PHY PLL: %d\n", ret); + break; + } + } + } + clk_set_rate(vp->dclk, clock); vop2_post_config(crtc);
@@ -3699,6 +3727,12 @@ static int vop2_bind(struct device *dev, struct device *master, void *data) return PTR_ERR(vop2->pclk); } + vop2->pll_hdmiphy0 = devm_clk_get_optional(vop2->dev, "pll_hdmiphy0"); + if (IS_ERR(vop2->pll_hdmiphy0)) { + drm_err(vop2->drm, "failed to get pll_hdmiphy0\n"); + return PTR_ERR(vop2->pll_hdmiphy0); + } + vop2->irq = platform_get_irq(pdev, 0); if (vop2->irq < 0) { drm_err(vop2->drm, "cannot find irq for vop2\n");
--
2.48.1