[PATCH 12/14] arm64: dts: imx8qm: add 24MHz clock-xtal24m
From: Frank Li <Frank.Li@nxp.com>
Date: 2025-01-31 21:35:13
Also in:
imx, linux-devicetree, linux-media, linux-phy, lkml
Subsystem:
arm/freescale imx / mxc arm architecture, the rest · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
Add fixed clock node clock-xtal24m to prepare to add camera support. Signed-off-by: Frank Li <Frank.Li@nxp.com> --- arch/arm64/boot/dts/freescale/imx8qm.dtsi | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
index 6fa31bc9ece8f..0d562c1997c47 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi@@ -585,6 +585,13 @@ mipi_pll_div2_clk: clock-controller-mipi-div2-pll { clock-output-names = "mipi_pll_div2_clk"; }; + xtal24m: clock-xtal24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "xtal_24MHz"; + }; + vpu_subsys_dsp: bus@55000000 { compatible = "simple-bus"; #address-cells = <1>;
--
2.34.1