Re: [PATCH v2 1/2] media: videobuf2: Fix dmabuf cache sync/flush in dma-contig
From: Tomasz Figa <tfiga@chromium.org>
Date: 2025-01-27 11:19:04
Also in:
linux-media, linux-rockchip, lkml, stable
Hi Mikhail, On Thu, Jan 16, 2025 at 2:25 AM Mikhail Rudenko [off-list ref] wrote:
When support for V4L2_FLAG_MEMORY_NON_CONSISTENT was removed in
commit 129134e5415d ("media: media/v4l2: remove
V4L2_FLAG_MEMORY_NON_CONSISTENT flag"),
vb2_dc_dmabuf_ops_{begin,end}_cpu_access() functions were made
no-ops. Later, when support for V4L2_MEMORY_FLAG_NON_COHERENT was
introduced in commit c0acf9cfeee0 ("media: videobuf2: handle
V4L2_MEMORY_FLAG_NON_COHERENT flag"), the above functions remained
no-ops, making cache maintenance for non-coherent dmabufs allocated by
dma-contig impossible.
Fix this by reintroducing dma_sync_sg_for_{cpu,device} calls to
vb2_dc_dmabuf_ops_{begin,end}_cpu_access() functions for non-coherent
buffers.
Fixes: c0acf9cfeee0 ("media: videobuf2: handle V4L2_MEMORY_FLAG_NON_COHERENT flag")
Cc: stable@vger.kernel.org
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
---
drivers/media/common/videobuf2/videobuf2-dma-contig.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)Thanks a lot for the patch! Sorry, for the delay. Ended up being sick with some nasty cold that took quite a while to recover. Please take a look at my comments inline.
quoted hunk ↗ jump to hunk
diff --git a/drivers/media/common/videobuf2/videobuf2-dma-contig.c b/drivers/media/common/videobuf2/videobuf2-dma-contig.c index bb0b7fa67b539aa73ad5ccf3c3bc318e26f8a4cb..889d6c11e15ab5cd4b4c317e865f1fef92df4b66 100644 --- a/drivers/media/common/videobuf2/videobuf2-dma-contig.c +++ b/drivers/media/common/videobuf2/videobuf2-dma-contig.c@@ -427,6 +427,13 @@ static int vb2_dc_dmabuf_ops_begin_cpu_access(struct dma_buf *dbuf, enum dma_data_direction direction) { + struct vb2_dc_buf *buf = dbuf->priv; + struct sg_table *sgt = buf->dma_sgt; + + if (!buf->non_coherent_mem || buf->vb->skip_cache_sync_on_finish)
skip_cache_sync_on_finish shouldn't apply to this function, because the buffer was shared with an external DMA-buf importer and we don't know in what state it is at this point.
+ return 0; +
We should also take care of the kernel mapping if it exists, because on some platforms it may not be coherent with the userspace one - using flush_kernel_vmap_range(). Please check how vb2_dc_prepare()/vb2_dc_finish() do it.
+ dma_sync_sg_for_cpu(buf->dev, sgt->sgl, sgt->nents, buf->dma_dir);
We can use the dma_sync_sgtable_*() variant here so we can just pass the entire sgt to it.
quoted hunk ↗ jump to hunk
return 0; }@@ -434,6 +441,13 @@ static int vb2_dc_dmabuf_ops_end_cpu_access(struct dma_buf *dbuf, enum dma_data_direction direction) { + struct vb2_dc_buf *buf = dbuf->priv; + struct sg_table *sgt = buf->dma_sgt; + + if (!buf->non_coherent_mem || buf->vb->skip_cache_sync_on_prepare) + return 0; + + dma_sync_sg_for_device(buf->dev, sgt->sgl, sgt->nents, buf->dma_dir); return 0;
Overall the same comments here as for vb2_dc_dmabuf_ops_begin_cpu_access() +/- flush would change to invalidate. Best regards, Tomasz