[PATCH v3 1/4] dt-bindings: net: ethernet-controller: Correct the definition of phy-mode
From: Yijie Yang <hidden>
Date: 2025-01-21 07:56:13
Also in:
linux-arm-msm, linux-devicetree, lkml, netdev
Subsystem:
networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Correct the definition of 'phy-mode' to reflect that RX and TX delays are added by the board, not the MAC, to prevent confusion and ensure accurate documentation. Signed-off-by: Yijie Yang <redacted> --- Documentation/devicetree/bindings/net/ethernet-controller.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index 45819b2358002bc75e876eddb4b2ca18017c04bd..d56f1a2e79c4656762c7397dc96408bdde19c52b 100644
--- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml@@ -74,7 +74,7 @@ properties: - rev-rmii - moca - # RX and TX delays are added by the MAC when required + # RX and TX delays are added by the board when required - rgmii # RGMII with internal RX and TX delays provided by the PHY,
--
2.34.1