Re: [PATCH v7 02/10] PCI: imx6: Add ref clock for i.MX95 PCIe
From: Manivannan Sadhasivam <hidden>
Date: 2025-01-19 07:02:54
Also in:
imx, linux-devicetree, linux-pci, lkml
On Tue, Nov 26, 2024 at 03:56:54PM +0800, Richard Zhu wrote:
quoted hunk ↗ jump to hunk
Add "ref" clock to enable reference clock. To avoid breaking DT backwards compatibility, i.MX95 REF clock might be optional. Use devm_clk_get_optional() to fetch i.MX95 PCIe optional clocks in driver. If use external clock, ref clock should point to external reference. If use internal clock, CREF_EN in LAST_TO_REG controls reference output, which implement in drivers/clk/imx/clk-imx95-blk-ctl.c. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> --- drivers/pci/controller/dwc/pci-imx6.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-)diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index 385f6323e3ca..f7e928e0a018 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c@@ -103,6 +103,7 @@ struct imx_pcie_drvdata { const char *gpr; const char * const *clk_names; const u32 clks_cnt; + const u32 clks_optional_cnt; const u32 ltssm_off; const u32 ltssm_mask; const u32 mode_off[IMX_PCIE_MAX_INSTANCES];@@ -1306,9 +1307,8 @@ static int imx_pcie_probe(struct platform_device *pdev) struct device_node *np; struct resource *dbi_base; struct device_node *node = dev->of_node; - int ret; + int i, ret, req_cnt; u16 val; - int i; imx_pcie = devm_kzalloc(dev, sizeof(*imx_pcie), GFP_KERNEL); if (!imx_pcie)@@ -1358,9 +1358,13 @@ static int imx_pcie_probe(struct platform_device *pdev) imx_pcie->clks[i].id = imx_pcie->drvdata->clk_names[i]; /* Fetch clocks */ - ret = devm_clk_bulk_get(dev, imx_pcie->drvdata->clks_cnt, imx_pcie->clks); + req_cnt = imx_pcie->drvdata->clks_cnt - imx_pcie->drvdata->clks_optional_cnt; + ret = devm_clk_bulk_get(dev, req_cnt, imx_pcie->clks); if (ret) return ret; + imx_pcie->clks[req_cnt].clk = devm_clk_get_optional(dev, "ref"); + if (IS_ERR(imx_pcie->clks[req_cnt].clk)) + return PTR_ERR(imx_pcie->clks[req_cnt].clk);
I think you should just switch to devm_clk_bulk_get_all() instead of getting the clks separately. As I told previously, the DT binding should ensure that correct clocks for the platforms are defined in DT and the driver has no business in validating it. Driver should trust the DT instead (unless there is a valid reason to not do so).
quoted hunk ↗ jump to hunk
if (imx_check_flag(imx_pcie, IMX_PCIE_FLAG_HAS_PHYDRV)) { imx_pcie->phy = devm_phy_get(dev, "pcie-phy");@@ -1509,6 +1513,7 @@ static const char * const imx8mm_clks[] = {"pcie_bus", "pcie", "pcie_aux"}; static const char * const imx8mq_clks[] = {"pcie_bus", "pcie", "pcie_phy", "pcie_aux"}; static const char * const imx6sx_clks[] = {"pcie_bus", "pcie", "pcie_phy", "pcie_inbound_axi"}; static const char * const imx8q_clks[] = {"mstr", "slv", "dbi"}; +static const char * const imx95_clks[] = {"pcie_bus", "pcie", "pcie_phy", "pcie_aux", "ref"};
And these static clock defines will go away too. - Mani -- மணிவண்ணன் சதாசிவம்