[PATCH] ARM: dts: ti: davinci: Align GPIO hog name with bindings
From: Krzysztof Kozlowski <hidden>
Date: 2025-01-16 09:00:35
Also in:
linux-devicetree, lkml
Subsystem:
lego mindstorms ev3, the rest, ti davinci machine support · Maintainers:
Linus Torvalds, Bartosz Golaszewski
Bindings expect GPIO hog names to end with 'hog' suffix, so correct it to fix dtbs_check warnings like: da850-lego-ev3.dtb: batt_volt_en: $nodename:0: 'batt_volt_en' does not match '^.+-hog(-[0-9]+)?$' Signed-off-by: Krzysztof Kozlowski <redacted> --- arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts b/arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts
index 4df10379ff22..173401c58d53 100644
--- a/arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts
+++ b/arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts@@ -412,14 +412,14 @@ &gpio { status = "okay"; /* Don't pull down battery voltage adc io channel */ - batt_volt_en { + batt-volt-en-hog { gpio-hog; gpios = <6 GPIO_ACTIVE_HIGH>; output-high; }; /* Don't impede Bluetooth clock signal */ - bt_clock_en { + bt-clock-en-hog { gpio-hog; gpios = <5 GPIO_ACTIVE_HIGH>; input;
@@ -433,19 +433,19 @@ bt_clock_en { * anything, but they are present in the source code from LEGO. */ - bt_pic_en { + bt-pic-en-hog { gpio-hog; gpios = <51 GPIO_ACTIVE_HIGH>; output-low; }; - bt_pic_rst { + bt-pic-rst-hog { gpio-hog; gpios = <78 GPIO_ACTIVE_HIGH>; output-high; }; - bt_pic_cts { + bt-pic-cts-hog { gpio-hog; gpios = <87 GPIO_ACTIVE_HIGH>; input;
--
2.43.0