On Thu, Jan 09, 2025 at 11:52:56PM +0800, Nick Chan wrote:

Daniel Thompson 於 2025/1/8 下晝6:52 寫道:

quoted

On Wed, Dec 11, 2024 at 07:34:38PM +0800, Nick Chan wrote:

quoted

Add driver for backlight controllers attached via Apple DWI 2-wire
interface, which is found on some Apple iPhones, iPads and iPod touches
with a LCD display.

Although there is an existing apple_bl driver, it is for backlight
controllers on Intel Macs attached via PCI, which is completely different
from the Samsung-derived DWI block.

Signed-off-by: Nick Chan <redacted>
---
 drivers/video/backlight/Kconfig  |  12 +++
 drivers/video/backlight/Makefile |   1 +
 drivers/video/backlight/dwi_bl.c | 122 +++++++++++++++++++++++++++++++

I'd rather this was called apple_dwi_bl.c to match that config options,
etc.

Still trying to determine the type of the backlight control, I think
it is linear however and I will send a new version when I am more
certain.

If you've got an physicalinstance of the backlight then you can get a
general idea by comparing levels: 512, 1024, 1536 and 2047.

A linear backlight will feel make the gaps feel uneven (e.g. the
difference between 1536 and 2047 will look very different to the
difference difference between 512 and 1024). A logarithmic backligt
will make the perceived brightness intervals between the above all
feel pretty similar.


Daniel.