Thread (4 messages) 4 messages, 2 authors, 2025-01-08

Re: [PATCH v2 0/2] fix some binding check errors for marvell

From: Gregory CLEMENT <gregory.clement@bootlin.com>
Date: 2025-01-08 08:26:01
Also in: linux-devicetree, linux-ide, lkml

Frank Wunderlich [off-list ref] writes:
From: Frank Wunderlich <redacted>

Thies series fixes some Errors reported by dtbs_check. First part is taken
from my old series [1] where i converted sata-platform txt binding to yaml
because it wasn't picked up.

[1] https://lore.kernel.org/linux-arm-kernel/20220311210357.222830-1-linux@fw-web.de/ (local)

I only try to fix the binding errors, i do not have any marvell board, so
cannot verify that my changes are correct. From my PoV peripheral
controllers should be disabled in the SoC DT and enabled in board DT.

Frank Wunderlich (2):
  arm64: dts: marvell: only enable complete sata nodes
  arm64: dts: marvell: drop additional phy-names for sata

Applied on mvebu/dt64

Thanks,

Gregory
 arch/arm64/boot/dts/marvell/armada-7040-db.dts             | 1 +
 arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts       | 2 ++
 arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts | 1 +
 arch/arm64/boot/dts/marvell/armada-8040-db.dts             | 5 +++--
 arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi         | 3 +--
 arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts    | 2 ++
 arch/arm64/boot/dts/marvell/armada-cp11x.dtsi              | 2 ++
 arch/arm64/boot/dts/marvell/cn9130-crb-B.dts               | 1 +
 arch/arm64/boot/dts/marvell/cn9131-db.dtsi                 | 1 +
 arch/arm64/boot/dts/marvell/cn9132-db.dtsi                 | 1 +
 10 files changed, 15 insertions(+), 4 deletions(-)

-- 
2.43.0
-- 
Grégory CLEMENT, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help