[PATCH v5 03/18] drm/rockchip: vop2: Fix the mixer alpha setup for layer 0
From: Andy Yan <hidden>
Date: 2024-12-09 12:30:33
Also in:
dri-devel, linux-devicetree, linux-rockchip, lkml
Subsystem:
arm/rockchip soc support, drm drivers, drm drivers and misc gpu patches, drm drivers for rockchip, the rest · Maintainers:
Heiko Stuebner, David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Sandy Huang, Heiko Stübner, Andy Yan, Linus Torvalds
From: Andy Yan <andy.yan@rock-chips.com>
The alpha setup should start from the second layer, the current calculation
starts incorrectly from the first layer, a negative offset will be obtained
in the following formula:
offset = (mixer_id + zpos - 1) * 0x10
Fixes: 604be85547ce ("drm/rockchip: Add VOP2 driver")
Tested-by: Derek Foreman <redacted>
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
---
(no changes since v1)
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
index d0b2b881ff07..1f0fa153c62e 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c@@ -2459,6 +2459,12 @@ static void vop2_setup_alpha(struct vop2_video_port *vp) struct vop2_win *win = to_vop2_win(plane); int zpos = plane->state->normalized_zpos; + /* + * Need to configure alpha from second layer. + */ + if (zpos == 0) + continue; + if (plane->state->pixel_blend_mode == DRM_MODE_BLEND_PREMULTI) premulti_en = 1; else
--
2.34.1