[PATCH 03/15] dt-bindings: atmel-sysreg: add sama7d65 RAM and PIT
From: <Ryan.Wanner@microchip.com>
Date: 2024-11-19 16:41:14
Also in:
linux-clk, linux-devicetree, linux-gpio, linux-mmc, linux-serial, linux-spi, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
From: Dharma Balasubiramani <dharma.b@microchip.com> Add SAMA7D65 RAM controller, PIT64 DT bindings. Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com> --- .../devicetree/bindings/arm/atmel-sysregs.txt | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
index 76e2b7978250..93c2a5a341f3 100644
--- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt@@ -13,6 +13,7 @@ PIT Timer required properties: PIT64B Timer required properties: - compatible: Should be "microchip,sam9x60-pit64b" or "microchip,sam9x7-pit64b", "microchip,sam9x60-pit64b" + "microchip,sama7d65-pit64b", "microchip,sam9x60-pit64b" - reg: Should contain registers location and length - interrupts: Should contain interrupt for PIT64B timer - clocks: Should contain the available clock sources for PIT64B timer.
@@ -27,12 +28,13 @@ Its subnodes can be: - watchdog: compatible should be "atmel,at91rm9200-wdt" RAMC SDRAM/DDR Controller required properties: -- compatible: Should be "atmel,at91rm9200-sdramc", "syscon" - "atmel,at91sam9260-sdramc", - "atmel,at91sam9g45-ddramc", - "atmel,sama5d3-ddramc", - "microchip,sam9x60-ddramc", - "microchip,sama7g5-uddrc", +- compatible: Should be "atmel,at91rm9200-sdramc", "syscon" or + "atmel,at91sam9260-sdramc" or + "atmel,at91sam9g45-ddramc" or + "atmel,sama5d3-ddramc" or + "microchip,sam9x60-ddramc" or + "microchip,sama7g5-uddrc" or + "microchip,sama7d65-uddrc","microchip,sama7g5-uddrc" or "microchip,sam9x7-ddramc", "atmel,sama5d3-ddramc". - reg: Should contain registers location and length
--
2.43.0