On 30/10/2024 16:50:43+0100, Geert Uytterhoeven wrote:

Hi Mike, Stephen, Alexander,

On Wed, Oct 30, 2024 at 12:01 PM Claudiu [off-list ref] wrote:

quoted

From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
On the Renesas RZ/G3S SoC the RTC clock is provided by the VBATTB
IP. A 32 KHz crystall oscillator could be connected to the VBATTB
input pins. The logic to control this clock (and pass it to RTC)
is inside the VBATTB IP. For this, the clk-vbattb driver was added
(patches 01-03/12).

Patches:
- 01-03/10: add VBATTB support that provides the RTC clock
- 04-05/10: add the RTC driver
- 06-09/10: update the device trees with proper nodes to enable RTC
-    10/10: enable proper config flags for RTC to work on RZ/G3S SoC

Merge strategy, if any:
- clock patches (01-03/10) need to go though the same tree because of
  patch 03/10 using the devm_clk_hw_register_gate_parent_hw() introduced
  in patch 02/12

Once Mike/Stephen are happy with 02, I can queue patches 01-03 in
renesas-clk.

quoted

- RTC patches (04-05/10) can go though RTC tree
- DTS and defconfig patches can go though Renesas tree

Patches 06 and 08 I can queue in renesas-devel soon.
For 07 and 09, I am waiting for feedback from Alexandre on the RTC
DT bindings.

I'll take 4 and 5 this cycle.

Thanks!

Gr{oetje,eeting}s,

                        Geert


--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

-- 
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com