Hi,
this series adds support for a new member in our IOTA platform.
The board is based on the i.MX8MP SoC. It adds support for most
of the board functionality except USB Type-C port and some other
minor things.

This series originally included the dt-binding for that Type-C
port controller but I finally removed it based on a good comment
from Krzysztof. I will post the Type-C binding including the driver
in a followup series.

Michal

Michal Vokáč (2):
  dt-bindings: arm: Add i.MX8MP IOTA2 Lumpy board
  arm64: dts: imx: Add imx8mp-iota2-lumpy board

 .../devicetree/bindings/arm/fsl.yaml          |   1 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../boot/dts/freescale/imx8mp-iota2-lumpy.dts | 423 ++++++++++++++++++
 3 files changed, 425 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-iota2-lumpy.dts

-- 
2.43.0