[PATCH v5 0/5] Add STM32MP25 USB3/PCIE COMBOPHY driver
From: Christian Bruel <christian.bruel@foss.st.com>
Date: 2024-09-03 12:14:49
Also in:
linux-devicetree, linux-phy, lkml
Changes in v5:
- Drop syscfg phandle and change driver to use lookup_by_compatible
- Use clk_bulk API and drop stm32_combophy_enable/disable_clocks
- Reorder required: list.
- Fix access-controllers maxItems
Changes in v4:
- "#phy-cells": Drop type item description since it is specified
by user node phandle.
- Rename stm32-combophy.yaml to match compatible
- Drop wakeup-source from bindings (should be generic)
- Alphabetically reorder required: list.
- Drop "Reviewed-by" since those previous changes
Changes in v3:
- Reorder MAINTAINERS patch
Changes in v2:
- Reorder entries
- Rename clock_names and reset_names bindings
- Rename and clarify rx-equalizer binding
Christian Bruel (5):
dt-bindings: phy: Add STM32MP25 COMBOPHY bindings
phy: stm32: Add support for STM32MP25 COMBOPHY.
MAINTAINERS: add entry for ST STM32MP25 COMBOPHY driver
arm64: dts: st: Add combophy node on stm32mp251
arm64: dts: st: Enable COMBOPHY on the stm32mp257f-ev1 board
.../bindings/phy/st,stm32mp25-combophy.yaml | 119 ++++
MAINTAINERS | 6 +
arch/arm64/boot/dts/st/stm32mp251.dtsi | 16 +
arch/arm64/boot/dts/st/stm32mp257f-ev1.dts | 14 +
drivers/phy/st/Kconfig | 11 +
drivers/phy/st/Makefile | 1 +
drivers/phy/st/phy-stm32-combophy.c | 590 ++++++++++++++++++
7 files changed, 757 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/st,stm32mp25-combophy.yaml
create mode 100644 drivers/phy/st/phy-stm32-combophy.c
--
2.34.1