The usb phy in i.MX95 is compatible with i.MX8MP's, this will add a
compatible "fsl,imx95-usb-phy" for i.MX95. Also change reg maxItems
to 2 since i.MX95 needs another regmap to control Type-C Assist (TCA)
block. Since i.MX95 usb phy is able to switch SS lanes, this will also
add orientation-switch and port property to the file.

Signed-off-by: Xu Yang <xu.yang_2@nxp.com>

---
Changes in v2:
 - replace minItems with description in reg property
 - remove orientation-switch and port
 - refer to usb-switch.yaml
 - use unevaluatedProperties
---
 .../bindings/phy/fsl,imx8mq-usb-phy.yaml      | 42 ++++++++++++++++---
 1 file changed, 37 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
index dc3a3f709fea..6d6d211883ae 100644
--- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml

@@ -11,12 +11,17 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - fsl,imx8mq-usb-phy
-      - fsl,imx8mp-usb-phy
+    oneOf:
+      - enum:
+          - fsl,imx8mq-usb-phy
+          - fsl,imx8mp-usb-phy
+      - items:
+          - const: fsl,imx95-usb-phy
+          - const: fsl,imx8mp-usb-phy
 
   reg:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   "#phy-cells":
     const: 0

@@ -89,7 +94,34 @@ required:
   - clocks
   - clock-names
 
-additionalProperties: false
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx95-usb-phy
+    then:
+      properties:
+        reg:
+          items:
+            - description: USB PHY Control range
+            - description: USB PHY TCA Block range
+    else:
+      properties:
+        reg:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx95-usb-phy
+    then:
+      $ref: /schemas/usb/usb-switch.yaml#