[PATCH v4 1/2] arm64: dts: ti: k3-j722s-main: Add R5F and C7x remote processor nodes
From: Beleswar Padhi <hidden>
Date: 2024-08-29 06:09:46
Also in:
linux-devicetree, lkml
Subsystem:
arm/texas instruments k3 architecture, the rest · Maintainers:
Nishanth Menon, Vignesh Raghavendra, Tero Kristo, Linus Torvalds
From: Apurva Nandan <redacted> The K3 J722S SoCs have one single-core Arm Cortex-R5F processor in each of the WAKEUP, MCU and MAIN voltage domain, and two C71x DSP subsystems in MAIN voltage domain. Add the DT nodes to support Inter-Processor Communication. Signed-off-by: Apurva Nandan <redacted> [ refactoring changes to k3-j722s-main.dtsi ] Signed-off-by: Beleswar Padhi <redacted> --- v4: Changelog: 1) Put standard properties (resets, firmware-name) before vendor specific properties in added DT Nodes. (Nishanth) Link to v3: https://lore.kernel.org/all/20240828112713.2668526-2-b-padhi@ti.com/ (local) v3: Changelog: 1) None to this patch. Link to v2: https://lore.kernel.org/all/20240612112259.1131653-2-b-padhi@ti.com/ (local) v2: Changelog: 1) Refactored changes from k3-j722s.dtsi to k3-j722s-main.dtsi. (Andrew) Link to v1: https://lore.kernel.org/all/20240607090433.488454-2-b-padhi@ti.com/ (local) arch/arm64/boot/dts/ti/k3-j722s-main.dtsi | 61 +++++++++++++++++++++++ 1 file changed, 61 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
index cadb4f7c2ea9..ed6f4ba08afc 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi@@ -153,6 +153,67 @@ usb1: usb@31200000{ dr_mode = "otg"; }; }; + + main_r5fss0: r5fss@78400000 { + compatible = "ti,am62-r5fss"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x78400000 0x00 0x78400000 0x8000>, + <0x78500000 0x00 0x78500000 0x8000>; + power-domains = <&k3_pds 261 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + + main_r5fss0_core0: r5f@78400000 { + compatible = "ti,am62-r5f"; + reg = <0x78400000 0x00008000>, + <0x78500000 0x00008000>; + reg-names = "atcm", "btcm"; + resets = <&k3_reset 262 1>; + firmware-name = "j722s-main-r5f0_0-fw"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <262>; + ti,sci-proc-ids = <0x04 0xff>; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + }; + + c7x_0: dsp@7e000000 { + compatible = "ti,am62a-c7xv-dsp"; + reg = <0x00 0x7e000000 0x00 0x00200000>; + reg-names = "l2sram"; + resets = <&k3_reset 208 1>; + firmware-name = "j722s-c71_0-fw"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <208>; + ti,sci-proc-ids = <0x30 0xff>; + status = "disabled"; + }; + + c7x_1: dsp@7e200000 { + compatible = "ti,am62a-c7xv-dsp"; + reg = <0x00 0x7e200000 0x00 0x00200000>; + reg-names = "l2sram"; + resets = <&k3_reset 268 1>; + firmware-name = "j722s-c71_1-fw"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <268>; + ti,sci-proc-ids = <0x31 0xff>; + status = "disabled"; + }; +}; + +/* MCU domain overrides */ + +&mcu_r5fss0_core0 { + firmware-name = "j722s-mcu-r5f0_0-fw"; +}; + +/* Wakeup domain overrides */ + +&wkup_r5fss0_core0 { + firmware-name = "j722s-wkup-r5f0_0-fw"; }; &main_conf {
--
2.34.1