[PATCH v13 1/2] arm64: dts: rockchip: Add AP6275P wireless support to Khadas Edge 2
From: Jacobe Zang <hidden>
Date: 2024-08-28 08:47:15
Also in:
asahi, linux-devicetree, linux-rockchip, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Khadas Edge2 uses the PCI-e Ampak AP6275P 2T2R Wi-Fi 6 module. The pcie@0 node can be used as Bridge1, so the wifi@0 node is used as a device under the Bridge1. Co-developed-by: Muhammed Efe Cetin <redacted> Signed-off-by: Muhammed Efe Cetin <redacted> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Jacobe Zang <redacted> --- arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
index dbddfc3bb4641..3d0f55c123d92 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts@@ -283,6 +283,22 @@ &pcie2x1l2 { reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>; vpcie3v3-supply = <&vcc3v3_pcie_wl>; status = "okay"; + + pcie@0,0 { + reg = <0x400000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + device_type = "pci"; + bus-range = <0x40 0x4f>; + + wifi: wifi@0,0 { + compatible = "pci14e4,449d", "brcm,bcm4329-fmac"; + reg = <0x410000 0 0 0 0>; + clocks = <&hym8563>; + clock-names = "lpo"; + }; + }; }; &pwm11 {
--
2.34.1