[PATCH v3 1/4] arm64: dts: ti: k3-am62a: add opp frequencies
From: Bryan Brattlof <hidden>
Date: 2024-08-26 17:22:28
Also in:
linux-devicetree, lkml
Subsystem:
arm/texas instruments k3 architecture, the rest · Maintainers:
Nishanth Menon, Vignesh Raghavendra, Tero Kristo, Linus Torvalds
One power management technique available to the Cortex-A53s is their ability to dynamically scale their frequency across the device's Operating Performance Points (OPP) The OPPs available for the Cortex-A53s on the AM62Ax can vary based on the silicon variant used. The SoC variant is encoded into the WKUP_MMR0_WKUP0_CTRL_MMR0_JTAG_USER_ID register which is used to limit to only OPP entries the variant supports. A table of all these variants can be found in it's data sheet[0] for the AM62Ax family. Add the OPP table into the SoC's fdti file along with the syscon node to describe the WKUP_MMR0_WKUP0_CTRL_MMR0_JTAG_USER_ID register to detect the SoC variant. [0] https://www.ti.com/lit/ds/symlink/am62a3.pdf Signed-off-by: Bryan Brattlof <redacted> --- arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi | 5 +++ arch/arm64/boot/dts/ti/k3-am62a7.dtsi | 51 +++++++++++++++++++++++++++++ 2 files changed, 56 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
index f5ac101a04dfa..0b1dd5390cd3f 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi@@ -17,6 +17,11 @@ chipid: chipid@14 { reg = <0x14 0x4>; }; + opp_efuse_table: syscon@18 { + compatible = "ti,am62-opp-efuse-table", "syscon"; + reg = <0x18 0x4>; + }; + cpsw_mac_syscon: ethernet-mac-syscon@200 { compatible = "ti,am62p-cpsw-mac-efuse", "syscon"; reg = <0x200 0x8>;
diff --git a/arch/arm64/boot/dts/ti/k3-am62a7.dtsi b/arch/arm64/boot/dts/ti/k3-am62a7.dtsi
index f86a23404e6dd..6c99221beb6bd 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a7.dtsi@@ -48,6 +48,8 @@ cpu0: cpu@0 { d-cache-line-size = <64>; d-cache-sets = <128>; next-level-cache = <&L2_0>; + operating-points-v2 = <&a53_opp_table>; + clocks = <&k3_clks 135 0>; }; cpu1: cpu@1 {
@@ -62,6 +64,8 @@ cpu1: cpu@1 { d-cache-line-size = <64>; d-cache-sets = <128>; next-level-cache = <&L2_0>; + operating-points-v2 = <&a53_opp_table>; + clocks = <&k3_clks 136 0>; }; cpu2: cpu@2 {
@@ -76,6 +80,8 @@ cpu2: cpu@2 { d-cache-line-size = <64>; d-cache-sets = <128>; next-level-cache = <&L2_0>; + operating-points-v2 = <&a53_opp_table>; + clocks = <&k3_clks 137 0>; }; cpu3: cpu@3 {
@@ -90,6 +96,51 @@ cpu3: cpu@3 { d-cache-line-size = <64>; d-cache-sets = <128>; next-level-cache = <&L2_0>; + operating-points-v2 = <&a53_opp_table>; + clocks = <&k3_clks 138 0>; + }; + }; + + a53_opp_table: opp-table { + compatible = "operating-points-v2-ti-cpu"; + opp-shared; + syscon = <&opp_efuse_table>; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-supported-hw = <0x01 0x0007>; + clock-latency-ns = <6000000>; + }; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-supported-hw = <0x01 0x0007>; + clock-latency-ns = <6000000>; + }; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-supported-hw = <0x01 0x0007>; + clock-latency-ns = <6000000>; + }; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-supported-hw = <0x01 0x0007>; + clock-latency-ns = <6000000>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-supported-hw = <0x01 0x0006>; + clock-latency-ns = <6000000>; + }; + + opp-1250000000 { + opp-hz = /bits/ 64 <1250000000>; + opp-supported-hw = <0x01 0x0004>; + clock-latency-ns = <6000000>; + opp-suspend; }; };
--
2.46.0