[PATCH v3 9/9] clk: clocking-wizard: move dynamic reconfig setup behind flag
From: Harry Austen <hidden>
Date: 2024-08-26 12:38:49
Also in:
linux-clk, linux-devicetree, lkml
Subsystem:
common clk framework, the rest · Maintainers:
Michael Turquette, Stephen Boyd, Linus Torvalds
Xilinx clocking wizard IP core's dynamic reconfiguration support is optionally enabled at build time. Use the new boolean devicetree property to indicate whether the hardware supports this feature or not. Signed-off-by: Harry Austen <redacted> --- drivers/clk/xilinx/clk-xlnx-clock-wizard.c | 73 +++++++++++----------- 1 file changed, 38 insertions(+), 35 deletions(-)
diff --git a/drivers/clk/xilinx/clk-xlnx-clock-wizard.c b/drivers/clk/xilinx/clk-xlnx-clock-wizard.c
index 35dad2fda254b..b30d8106ac279 100644
--- a/drivers/clk/xilinx/clk-xlnx-clock-wizard.c
+++ b/drivers/clk/xilinx/clk-xlnx-clock-wizard.c@@ -1192,20 +1192,6 @@ static int clk_wzrd_probe(struct platform_device *pdev) if (IS_ERR(clk_wzrd->base)) return PTR_ERR(clk_wzrd->base); - ret = of_property_read_u32(np, "xlnx,speed-grade", &clk_wzrd->speed_grade); - if (!ret) { - if (clk_wzrd->speed_grade < 1 || clk_wzrd->speed_grade > 3) { - dev_warn(&pdev->dev, "invalid speed grade '%d'\n", - clk_wzrd->speed_grade); - clk_wzrd->speed_grade = 0; - } - } - - clk_wzrd->clk_in1 = devm_clk_get(&pdev->dev, "clk_in1"); - if (IS_ERR(clk_wzrd->clk_in1)) - return dev_err_probe(&pdev->dev, PTR_ERR(clk_wzrd->clk_in1), - "clk_in1 not found\n"); - clk_wzrd->axi_clk = devm_clk_get_enabled(&pdev->dev, "s_axi_aclk"); if (IS_ERR(clk_wzrd->axi_clk)) return dev_err_probe(&pdev->dev, PTR_ERR(clk_wzrd->axi_clk),
@@ -1220,31 +1206,48 @@ static int clk_wzrd_probe(struct platform_device *pdev) if (ret) return dev_err_probe(&pdev->dev, ret, "failed to setup monitor\n"); - ret = clk_wzrd_register_output_clocks(&pdev->dev, nr_outputs); - if (ret) - return ret; - - clk_wzrd->clk_data.num = nr_outputs; - ret = devm_of_clk_add_hw_provider(&pdev->dev, of_clk_hw_onecell_get, &clk_wzrd->clk_data); - if (ret) { - dev_err(&pdev->dev, "unable to register clock provider\n"); - return ret; - } + if (of_property_read_bool(np, "xlnx,dynamic-reconfig")) { + ret = of_property_read_u32(np, "xlnx,speed-grade", &clk_wzrd->speed_grade); + if (!ret) { + if (clk_wzrd->speed_grade < 1 || clk_wzrd->speed_grade > 3) { + dev_warn(&pdev->dev, "invalid speed grade '%d'\n", + clk_wzrd->speed_grade); + clk_wzrd->speed_grade = 0; + } + } - if (clk_wzrd->speed_grade) { - clk_wzrd->nb.notifier_call = clk_wzrd_clk_notifier; + clk_wzrd->clk_in1 = devm_clk_get(&pdev->dev, "clk_in1"); + if (IS_ERR(clk_wzrd->clk_in1)) + return dev_err_probe(&pdev->dev, PTR_ERR(clk_wzrd->clk_in1), + "clk_in1 not found\n"); - ret = devm_clk_notifier_register(&pdev->dev, clk_wzrd->clk_in1, - &clk_wzrd->nb); + ret = clk_wzrd_register_output_clocks(&pdev->dev, nr_outputs); if (ret) - dev_warn(&pdev->dev, - "unable to register clock notifier\n"); + return ret; + + clk_wzrd->clk_data.num = nr_outputs; + ret = devm_of_clk_add_hw_provider(&pdev->dev, of_clk_hw_onecell_get, + &clk_wzrd->clk_data); + if (ret) { + dev_err(&pdev->dev, "unable to register clock provider\n"); + return ret; + } - ret = devm_clk_notifier_register(&pdev->dev, clk_wzrd->axi_clk, - &clk_wzrd->nb); - if (ret) - dev_warn(&pdev->dev, - "unable to register clock notifier\n"); + if (clk_wzrd->speed_grade) { + clk_wzrd->nb.notifier_call = clk_wzrd_clk_notifier; + + ret = devm_clk_notifier_register(&pdev->dev, clk_wzrd->clk_in1, + &clk_wzrd->nb); + if (ret) + dev_warn(&pdev->dev, + "unable to register clock notifier\n"); + + ret = devm_clk_notifier_register(&pdev->dev, clk_wzrd->axi_clk, + &clk_wzrd->nb); + if (ret) + dev_warn(&pdev->dev, + "unable to register clock notifier\n"); + } } return 0;
--
2.46.0